Bridgestone Americas has introduced the new Alenza Prestige, a premium highway tyre designed for crossover utility vehicles (CUVs), sport utility vehicles (SUVs) and light trucks. This latest model integrates the company’s next-generation ENLITEN Technology to deliver a combination of luxury, performance and durability. A key feature is its extended limited mileage warranty, which offers coverage for up to 70,000 miles (approximately 112,654 km).

The tyre is engineered to provide a quiet and comfortable driving experience. This is achieved through QuietTrack Technology, an innovation designed to minimise tread pattern noise, and a wide centre rib that contributes to both a whisper-quiet ride and responsive handling. The use of advanced structural components and specialised compounds, including PeakLife Polymer, ensures the Alenza Prestige offers superior, long-lasting performance and an enhanced ride quality over its predecessor.

Significant improvements have been made in wet-weather safety. Testing demonstrates that the new Alenza Prestige stops six feet shorter than the Continental TrueContact Tour and eight feet shorter than the previous Bridgestone Alenza AS Ultra, representing a four percent and six percent advantage in wet stopping distance, respectively. This enhanced braking performance is intended to give drivers greater confidence and control during rainy conditions.

Available for purchase in 47 sizes to fit wheel diameters from 16 to 22 inches, the tyre accommodates a wide range of popular vehicles, including models from Acura, Audi, BMW, GMC, Lexus and Mercedes-Benz. The development of the Alenza Prestige also reflects Bridgestone’s broader E8 Commitment, specifically supporting the company’s values of Ecology, Extension and Ease.

Dale Harrigle Chief Engineer, Tyre Development, Bridgestone Americas, said, “The all-new Alenza Prestige premium highway tyre is for drivers who want a long-lasting, elegant and comfortable ride without compromising on consistent wet-weather performance. We designed it with rolling resistance technology for impressive fuel efficiency and a remarkable balance of performance and sustainability elements that match the qualities of premium CUVs, SUVs and trucks.”

Comments (0)

ADD COMMENT

Link Copied!

MAXAM is set to showcase its advanced agricultural tyre solutions at Agritechnica 2025 in Hannover from 9 to 15 November. Visitors can find the company at Stand A04 in Hall 20, where the exhibition theme ‘More Pull. Less Fuel’ will guide the presentation. This philosophy underscores the company's dedication to developing tyres that enhance operational efficiency and contribute to more sustainable farming practices by reducing fuel consumption and soil compaction. The event provides a significant opportunity for MAXAM to demonstrate its commitment to innovation and the expansion of its product portfolio.

On display will be a range of DLG-awarded tyres, including robust models for high-horsepower tractors and versatile options for specialised implements, illustrating the company's technical breadth. Beyond presenting products, MAXAM considers the trade fair a vital meeting point for industry collaboration. It serves as a platform for direct engagement with farmers, partners and machine manufacturers, whose feedback provides invaluable, real-world insights that directly influence the future direction of product and service development, ensuring they remain precisely aligned with evolving market needs.

As a part of SAILUN Group, one of the 10 largest tyre manufacturers in the world, MAXAM leverages its extensive international presence and collaborative research initiatives to drive continuous innovation. The company is dedicated to advancing agricultural tyre technology, creating sophisticated solutions that directly address the evolving demands of modern farming. This focus encompasses critical areas such as enhanced sustainability, improved cost-efficiency and superior field performance.

Comments (0)

ADD COMMENT

Link Copied!

Radar Tires has expanded its US distribution network with the opening of two new domestic distribution centres in Knoxville, Tennessee, and Parkesburg, Pennsylvania, as part of efforts to strengthen product accessibility and service reliability for its growing customer base.

The expansion increases the brand’s domestic distribution centres from one to three. It aims to improve delivery efficiency and inventory availability across key regions, particularly in the Southeast and Northeast of the United States.

“Stocking domestic tyre inventory is a key part of the Radar strategy going forward,” said Rob Montasser, Vice President of Sales for Radar Tires, USA. “It ensures our distributors and retailers have easy access to the products that their customers need, without the long lead times or supply chain uncertainty. These new locations allow us to be faster, more flexible, and more dependable.”

The company said the additional facilities will reduce delivery times and ensure that its core product range remains readily available to meet rising market demand.

With existing operations in Texas, the addition of centres in Tennessee and Pennsylvania underscores Radar Tires’ long-term strategy to enhance supply chain responsiveness and reinforce its position as one of the most customer-focused distribution networks in the tyre industry.

Comments (0)

ADD COMMENT

Link Copied!

Cabot Corporation reported lower quarterly earnings, as weaker demand in its Reinforcement Materials segment and softer volumes in Performance Chemicals weighed on results. However, the company ended fiscal 2025 with solid cash flow and continued shareholder returns.

For the fourth quarter ended 30 September, Cabot posted net income of USD 43 million, or USD 0.79 per share, compared with USD 137 million, or USD 2.43 per share, in the same period a year earlier.

Full-year diluted earnings per share were USD 6.02, while adjusted earnings per share rose 3 percent year-on-year to USD 7.25.

“I am very pleased with another strong year of Adjusted EPS growth where we achieved USD 7.25, up 3 percent year over year, in a year with a challenging macroeconomic backdrop,” said Sean Keohane, Cabot’s President and Chief Executive Officer. “This performance was driven by higher EBIT in our Performance Chemicals segment, which increased 18 percent year over year, partially offset by EBIT in our Reinforcement Materials segment, which declined 5 percent.”

Cabot’s revenue for the quarter fell to USD 899 million from USD 1.0 billion a year earlier, while full-year sales declined to USD 3.7 billion from USD 4.0 billion.

The Boston-based speciality chemicals manufacturer said fourth-quarter cash flow from operations totalled USD 219 million, enabling USD 64 million in shareholder returns through dividends and share buybacks. For the full fiscal year, Cabot generated USD 665 million in operating cash flow, funding USD 274 million in capital investments, USD 96 million in dividend payments and USD 168 million in share repurchases.

Keohane said the company’s balance sheet remained strong, with a net debt-to-EBITDA ratio of 1.2 times, providing flexibility to invest in growth while continuing to return capital to shareholders.

The company’s Reinforcement Materials segment reported a USD 4 million decline in EBIT from the prior-year quarter, reflecting lower volumes in the Americas and Asia Pacific, partly offset by cost efficiencies. Global volumes fell 5 percent, including a 7 percent drop in the Americas, where lower tyre production by customers was attributed to increased Asian tyre imports.

Performance Chemicals EBIT decreased USD 2 million year-over-year, mainly due to a 5 percent drop in volumes led by weaker demand in Europe, particularly from construction-related applications.

Cabot ended the quarter with  percent 258 million in cash and spent percent 64 million on capital expenditures. The company recorded a 55 percent effective tax rate in the fourth quarter and an operating tax rate of 27 percent for fiscal 2025.

Looking ahead, Keohane cautioned that market conditions remain challenging, particularly in the Reinforcement Materials sector. “We do not yet see signs of improvement in the external environment, particularly as it relates to regional demand trends in Reinforcement Materials due to the impact of elevated Asian tire imports into western regions,” he said.

The company anticipates improvement in Performance Chemicals, led by growth in battery materials and infrastructure-related applications, while maintaining strong cash flow to support investment and shareholder returns.

“While market conditions remain challenging, we continue to execute on our foundation of commercial and operational excellence, and we remain focused on managing costs, strengthening operations, and positioning the company for long-term growth,” Keohane said.

In fiscal 2025, Cabot also announced an agreement to acquire Bridgestone Corporation’s reinforcing carbons plant in Mexico and released its 2024 Sustainability Report, noting it had achieved 11 of its 15 sustainability goals ahead of schedule and established new 2030 targets.

Comments (0)

ADD COMMENT

Link Copied!

The German Rubber Industry Association (wdk) has responded positively to the 'Berlin Declaration’, characterising it as an essential and long-awaited political signal. From the wdk's perspective, the declaration represents a crucial commitment from the ‘Friends of Industry’ to bolster the manufacturing sector, which is fundamental to preserving Germany's industrial core and the multitude of upstream and downstream jobs it sustains. The association's Managing Director, Boris Engelhardt, emphasised that this initiative correctly identifies the urgent need for Europe to recognise and champion industrial value creation.

The wdk finds it particularly significant that the impetus for this declaration originated from a coalition of 17 member states, a fact that underscores a shared political priority independent of the EU Commission's agenda. While the declaration's broad framework allows for various interpretations, the wdk has identified the reduction of bureaucratic burdens as its paramount objective. On this specific point, the association reports being in complete alignment with Federal Minister for Economic Affairs Katherina Reiche. The wdk now asserts that the true measure of the declaration's success will lie in its translation from a political statement into actionable policy, urging the addressed EU institutions to move beyond acknowledgment and proceed with swift and decisive implementation.

Comments (0)

ADD COMMENT

Link Copied!