Westlake To Showcase New Generation Truck Tyres At IAA Transportation 2026

Westlake To Showcase New Generation Truck Tyres At IAA Transportation 2026


Westlake will present a new range of commercial truck tyres at IAA Transportation 2026 in Hannover, as it expands its Gen II portfolio for European fleets.

The company said it would introduce new products developed to improve rolling resistance, fuel efficiency and mileage performance, in collaboration with Interpneu and Pneuhage Fleet Solution .

The latest developments focus on two product lines: the Long Run series, designed to reduce rolling resistance, and the PRO series, aimed at high-mileage applications.

The Long Run range includes the WSL2 steer tyre, WDL2+ drive tyre and WTL2 trailer tyre. Westlake said the WSL2 and WDL2+ achieve EU Tyre Label Class A for rolling resistance. The tyres are designed for long-haul operations, with an emphasis on fuel efficiency and extended service life.

The WSL2 steer tyre is designed to support stable handling and high mileage, using a tread design and compound aimed at reducing heat generation and rolling resistance. The WDL2+ drive tyre focuses on mileage, traction and efficiency, incorporating a wider tread design and low rolling resistance compound.

The WTL2 trailer tyre is intended to provide durability and stability in trailer applications, combining a low rolling resistance compound with a tread design aimed at extending service life.

Alongside the Long Run series, Westlake will showcase its PRO series, developed for fleet operations where durability and mileage are priorities. The WTR PRO trailer tyre features a wider tread design and wear-resistant compound, aimed at improving mileage and ensuring consistent wear.

The four new tyres — WSL2, WDL2+, WTL2 and WTR PRO — will be available for order during the event.

Westlake said it would also present selected Gen II commercial tyres as part of its broader portfolio for European fleet applications.

IAA Transportation 2026 will be held from 15 to 20 September in Hannover, Germany.

Continental Secures OE Approval For All-Electric Mercedes-AMG CLA

Continental Secures OE Approval For All-Electric Mercedes-AMG CLA

Continental has secured original-equipment approval for the new all-electric Mercedes-AMG CLA series, which will roll off the line on a bespoke version of the SportContact 7. The tyre sits among the firm's flagship ultra-high-performance lines, and the approval extends across six fitments measuring 19 and 20 inches.

As a summer tyre, the SportContact 7 is built for sharp, immediate response and precise cornering. Its compound and tread design target secure grip and brief stopping distances on dry and wet surfaces alike, holding stability at elevated speeds. The two companies cooperated to match the tyre to the vehicle, weighing handling, braking, comfort, efficiency and mileage.

Every approved fitment wears Mercedes-AMG's MO1 or MO1A original-equipment marking, showing it satisfies the brand's toughest performance criteria. Each also carries XL marking for greater load capacity, while the largest, 275/35 ZR20, adds HL marking for extremely high loads. ContiSilent noise-reduction technology is included throughout, with polyurethane foam bonded to the inner tread surface cutting vibration transfer into the cabin and improving comfort.

Record-Breaking Pirelli P Zero Trofeo RS Developed For BMW M2, M3 and M4

Record-Breaking Pirelli P Zero Trofeo RS Developed For BMW M2, M3 and M4

Pirelli has engineered a bespoke version of its P Zero Trofeo RS semi-slick tyre for three flagship BMW M models: the M2, M3 and M4. Developed in partnership with the German manufacturer, the road-legal track tyre is engineered to deliver safety and sporting performance, particularly dry grip, cornering stability and braking, along with consistent performance during track use.

The new fitment has powered two Nürburgring-Nordschleife records. The BMW M2 with M Performance Track Kit, which pairs street-legal driving with an optimised set-up for greater track-day precision, lapped in 7:25.068 minutes, beating the compact car record held by the M2 CS by 0.5 seconds. The BMW M3 CS Touring completed the circuit in 7:29.490, becoming the fastest Touring car ever around the legendary German track and beating the previous record by nearly six seconds. The Nordschleife also served as the main development venue for the tyre.

Close collaboration between Pirelli and BMW M's R&D teams underpinned the bespoke programme. Advanced virtual development techniques allowed the tyre's characteristics to be adapted to different requirements from the earliest project stages, in line with Pirelli's Perfect Fit approach of creating products tailored to each specific model or application. After the virtual phase, development moved to track testing at the Nardò circuit and the Nürburgring, where simulation-derived solutions were validated in real-world conditions.

All Pirelli fitments for the German high-performance car manufacturer carry BMW's star marking, confirming homologation and compliance with stringent performance and safety requirements. The new fitments strengthen a longstanding partnership now spanning more than 30 bespoke tyre projects across the P Zero family, from the latest-generation P Zero and the P Zero R to the P Zero Trofeo RS and P Zero Winter 2.

NEXEN TIRE Secures OE Supply For Hyundai’s All-New TUCSON

NEXEN TIRE Secures OE Supply For Hyundai’s All-New TUCSON

NEXEN TIRE will provide original equipment tyres for the all-new Hyundai TUCSON compact SUV, with the supply rolling out sequentially across Korea, North America and Europe. The company is fitting the Korean-market vehicles with the ROADIAN GTX in 17-inch sizes and the N'FERA Supreme S in 18-, 19- and 20-inch sizes.

North American deliveries are scheduled to start with internal combustion engine variants later this year, followed by hybrid models in the first quarter of next year, using the same product lineup as Korea. For Europe, the N'FERA Primus will be offered in 17- and 18-inch sizes and the N'FERA Sport in 19- and 20-inch sizes, with the selection tailored to local driving conditions.

The ROADIAN GTX, engineered specifically for SUVs, employs an advanced compound that sustains braking performance and ride comfort across a wide temperature range throughout the year. Its zigzag tread design distributes contact pressure to curb vehicle pulling, while improved tread life lengthens replacement intervals. The N'FERA Supreme S, a flagship tyre for high-performance premium vehicles, emphasises quietness and ride comfort. Using convolutional neural network technology, an AI-based image recognition model, NEXEN TIRE optimised the tread pattern to reduce noise and restrict road noise entering the cabin, and pattern retention technology helps maintain consistent performance even after tread wear reaches 50 percent of the wear limit.

The TUCSON contract illustrates NEXEN TIRE's OE capabilities in matching products to vehicle segments and market requirements. The company holds a broad OE portfolio spanning leading global premium automakers and volume models that account for significant regional sales. The supply follows recent OE fits for the Hyundai Avante, known as the Elantra in some markets, and the Kia Sorento.

John Bosco (Hyeon Suk) Kim, CEO, NEXEN TIRE, said, "The all-new TUCSON belongs to a segment with strong demand both in Korea and abroad, and this supply allows us to reach a wider range of drivers. As the supply extends beyond Korea to North America and Europe, we expect it to further strengthen our brand awareness in the global market."

GRI Agricultural Tyres Outperform VF Benchmark In Independent DLG Tests

GRI Agricultural Tyres Outperform VF Benchmark In Independent DLG Tests

Global Rubber Industries (GRI) has reported higher traction, productivity and fuel efficiency for its GREEN XLR vFLEX 70 agricultural tyres than an established variable-footprint (VF) benchmark, following independent testing by Germany’s DLG TestService.

The Sri Lanka-based tyre manufacturer received the DLG Approved Quality Mark under Test Report 7616 after its tyres were assessed for traction, productivity, fuel efficiency and soil preservation at the testing organisation’s facility in Groß-Umstadt, Germany.

The tests used a John Deere 6R 215 tractor fitted with GRI GREEN XLR vFLEX 70 tyres measuring 710/70 R 42 on the rear axle and 600/70 R 30 on the front axle. The tyres were compared with an established VF reference tyre.

The results showed that the GRI tyres delivered 17.2 per cent higher traction and 3 per cent greater productivity than the benchmark. Hourly fuel consumption, measured in litres per hectare, was 3 per cent lower.

DLG concluded: "Overall, the GRI Green XLR vFLEX 70 impressed in the tested trials, particularly in terms of traction, productivity, and energy efficiency."

The productivity assessment measured hectares covered per hour, taking into account drawbar force, driving speed and wheel slip.

GRI said a three percent productivity improvement could translate into approximately 120 additional hectares covered over 1,000 operating hours, assuming a constant work rate of four hectares an hour. The company described this as an illustrative calculation rather than a measured test result.

The fuel-efficiency results also indicated potential operating savings. Based on an illustrative consumption rate of 20 litres per hectare, a 3 per cent reduction would save approximately 0.6 litres per hectare. Across 1,000 hectares, this would amount to about 600 litres.

GRI estimated that the saving would be worth approximately EUR 900 at a fuel price of EUR 1.50 a litre. It stressed that actual savings would depend on operating conditions, fuel consumption and prevailing fuel prices.

The DLG assessment also examined soil protection. However, the findings were only partially conclusive because usable measurements were available from a soil depth of 20cm under the selected test conditions.

Suresh Damodaran, Head Of Technical at GRI, said the independent assessment provided farmers with measurable evidence of the tyres' performance.

"These results are an important milestone for GRI and a clear validation of what our engineering teams have been working toward," said Damodaran. "Independent testing by DLG now gives farmers measurable evidence of how our tires perform in the field."

He added: "For farmers, the real value lies in what these numbers mean in the field," Damodaran added. "Stronger traction, higher productivity and lower fuel consumption all contribute to more efficient operations and better returns on their equipment. Our objective is not simply to manufacture high-performance tires, but to develop solutions that deliver measurable value to the people who depend on them every day."

GRI said the findings reflected its engineering capabilities in the agricultural tyre segment. It also noted that total cost of ownership would depend on other factors, including purchase price, service life, maintenance and operating conditions.

Global Rubber Industries manufactures specialty tyres for the agriculture, construction and material handling sectors. The company operates tyre production and mixing facilities in Sri Lanka and has a presence in more than 85 markets worldwide.