Australia has released its first national specification for the use of crumb rubber asphalt on local roads, a move intended to give councils clearer guidance on designing and maintaining light-to-medium-duty networks and to strengthen domestic recycling demand for end-of-life tyres.

The Crumb Rubber Modified Dense Graded Asphalt (CRM DGA) Model Specification for light to medium duty roads was published by the Australian Flexible Pavement Association (AsPA) following collaboration with Tyre Stewardship Australia. The document offers standardised technical requirements for councils, which manage about 75 percent of the national road network — roughly 675,000km of streets and community-level infrastructure.

Existing asphalt standards were largely developed for higher-order state roads, leaving local governments to interpret specifications that did not reflect lower traffic loads or the environmental conditions typical of suburban and regional networks. The new model specification aims to close that gap by setting guidance aligned with the factors that most influence degradation on council roads, such as surface ageing and weather exposure.

The specification promotes the use of crumb rubber modified binders, which can extend pavement life under light-to-medium-duty conditions. Incorporating recycled rubber also aligns with broader circular-economy policies across Australia’s states and municipalities, which are seeking to reduce landfill and illegal dumping while supporting domestic tyre-recycling capacity.

AfPA said the CRM DGA Model Specification V1.0, dated October 2025, is publicly available. It includes requirements for mix design and materials, construction processes such as compaction and temperature control, and performance testing suited to council networks. It also offers practical guidance on integrating reclaimed asphalt pavement content.

Local governments seeking case studies and procurement tools on crumb rubber applications can access Tyre Stewardship Australia’s Crumb Rubber Resource Centre for further technical and project information.

Comments (0)

ADD COMMENT

Link Copied!

HS HYOSUNG ADVANCED MATERIALS has completed and commenced operation of a 17.5-MWp rooftop solar power installation at its facility in Vietnam’s Nhon Trach Industrial Park, located within Dong Nai Province. This marks a significant step in the company’s broader effort to reshape its Vietnam operations – its largest global manufacturing base for tyre cords and technical yarns – into what it terms a ‘Smart Green Factory’. By merging renewable energy infrastructure with digital energy management systems, developed in partnership with the energy IT specialist Nuriflex, the firm is positioning this site at the forefront of its transition towards becoming a global eco-friendly manufacturing hub.

A key element of this transformation is the deployment of an Internet of Things based energy management system, which allows for real-time oversight of electricity generation and equipment performance. This digital layer not only streamlines operational efficiency but also contributes to greater equipment reliability and overall productivity gains, ensuring that the integration of renewable energy delivers tangible improvements beyond simple power generation.

With further solar installations set to be completed by August, total rooftop capacity at the Nhon Trach site will reach 37.5 MWp. Once fully operational in the latter half of the year, HS HYOSUNG ADVANCED MATERIALS anticipates annual electricity cost savings exceeding KRW 6 billion (approximately USD 3.94 million), bolstering its cost competitiveness. The expansion is also expected to deliver meaningful reductions in greenhouse gas emissions, reinforcing the company’s long-term commitment to sustainable management practices.

Through advanced energy IoT solutions, the Vietnam subsidiary now systematically manages carbon reduction data generated from its solar power operations. This capability enables a more structured response to rising demands from major global customers – including Michelin, Bridgestone, Goodyear, Continental and Pirelli – for verified renewable energy usage and carbon emissions information. By strengthening its ESG performance across the supply chain, the company is leveraging its solar infrastructure and smart energy management not merely as facility investments but as strategic tools to enhance environmental responsibility and competitiveness in a market where sustainable value chains are increasingly essential.

“Starting with our Vietnam production base, we are simultaneously promoting renewable energy transition and energy efficiency improvements across our operations. By expanding solar power facilities, we will strengthen both cost competitiveness and ESG capabilities while proactively responding to the evolving requirements of our global customers,” said an official from HS HYOSUNG ADVANCED MATERIALS.

Comments (0)

ADD COMMENT

Link Copied!

The Association of Natural Rubber Producing Countries (ANRPC) has released its Monthly NR Statistical Report for February 2026, detailing a period of significant market activity influenced by geopolitical tensions, macroeconomic changes and shifting supply-demand dynamics within the global natural rubber sector.

As per the report, global natural rubber production for 2026 is forecast to reach 15.324 million tonnes, a 2.2 percent increase from the 14.996 million tonnes recorded in 2025. February output alone is projected at 994,000 tonnes, marking a 3.4 percent year-on-year rise due to favourable weather and higher rubber prices. Despite this overall growth, production trends vary among member nations. While Thailand is expected to remain the top producer, Indonesia and Vietnam face short-term constraints from structural and agronomic issues. Meanwhile, Malaysia is advancing efforts to restore abandoned plantations, with the Rubber Production Incentive activated in Sarawak and Sabah and the Malaysian Rubber Board targeting the rehabilitation of 4,137 hectares of idle land in 2026.

Physical and futures markets saw notable price increases across major grades in February. In Kuala Lumpur, SMR-20 averaged USD 2.01 per kilogramme, a 5.13 percent monthly gain, while STR-20 in Bangkok rose 5.12 percent to USD 2.11 per kilogramme. Sheet rubber grades also strengthened, with RSS-3 increasing 7.84 percent to USD 2.35 per kilogramme and RSS-4 in Kottayam surging 10.38 percent to USD 2.34 per kilogramme. Centrifuged latex in Kuala Lumpur closed the month at USD 1.61 per kilogramme. Futures mirrored this firming trend, as the Shanghai Futures Exchange May 2026 contract averaged roughly 16,508 CNY (approximately USD 2,388) per tonne and the SGX contract averaged USD 1.92 per kilogramme, supported by strong demand and tightening supply expectations ahead of the seasonal low-yield period from February to May.

Crude oil volatility added further complexity, with Brent averaging USD 70.89 per barrel in February – up 6.43 percent from January – before spiking to approximately USD 104 per barrel in early March following military actions in the Middle East and the closure of the Strait of Hormuz, a conduit for nearly 20 percent of global oil supply. This has introduced a risk premium with implications for synthetic rubber competitiveness and natural rubber demand. Currency shifts also play a role, as the Malaysian Ringgit appreciated modestly to 3.89 MYR per USD and the Thai Baht strengthened to around 31.08 THB per USD by late February, affecting trade competitiveness. Looking ahead, rising automotive production, especially of new energy vehicles in China, India and Southeast Asia, is expected to sustain demand and support prices. However, risks persist from US-China trade tensions, Middle East geopolitical instability, weather uncertainties during the low-yield season and currency fluctuations tied to US monetary policy, all of which could disrupt supply chains and export revenues.

Comments (0)

ADD COMMENT

Link Copied!

Tokyo Zairyo Co., Ltd., a wholly owned subsidiary of Zeon Corporation, marked a significant milestone in November 2025 by establishing a new branch office in Chennai, Tamil Nadu, India. Following the completion of all necessary preparations, this location has now commenced full-scale operations. The move represents a deliberate effort to broaden the company’s commercial reach across the Indian market while simultaneously constructing an organizational structure capable of responding with greater agility to the evolving and increasingly diverse requirements of its customers.

This southern expansion comes approximately 15 years after the company first established its Indian subsidiary, Tokyo Zairyo (India) Pvt. Ltd., with an office in Gurugram, Haryana, in 2011. By positioning a second office in Chennai, the firm now operates a coordinated network spanning the northern and southern regions of the country. Close collaboration between the two locations is intended to strengthen information services and enhance user support, leveraging both internal capabilities and external partnerships to better serve Japanese automotive parts manufacturers and processors operating throughout India.

Through this dual-office structure, Tokyo Zairyo is poised to advance its core business of purchasing and selling a broad spectrum of materials, including rubber, resins and elastomers. The synchronised operations in Gurugram and Chennai enable the company to deliver more responsive support, ensuring that clients across the Indian automotive supply chain benefit from efficient service and a reliable supply of essential materials.

Comments (0)

ADD COMMENT

Link Copied!

Kuraray Co., Ltd. has announced a comprehensive global price adjustment for its portfolio of Liquid Rubber products and ISOBAM alkaline water-soluble polymer. These changes, which are set to take effect on 16 April 2026, will see prices rise by at least USD 2 per kg.

The driving forces behind these significant pricing actions are multifaceted, rooted in substantial disruptions to global supply chains. These disruptions are largely attributed to the ongoing conflict in the Middle East, which has had a cascading effect on logistics. Compounding this issue are the sharply rising costs associated with transportation and essential raw materials.

This strategic move is essential for the company to maintain operational stability and continue the supply of Liquid Rubber and ISOBAM amidst the volatile market conditions.

Comments (0)

ADD COMMENT

Link Copied!