Anyline Data Shows 15% Of US Tyres Failed Safety Threshold During National Tire Safety Week

Anyline Data Shows 15% Of US Tyres Failed Safety Threshold During National Tire Safety Week

AI mobile data capture company Anyline has reported that approximately 15 percent of tyres inspected across United States during National Tire Safety Week, observed from 29 June to 5 July 2026, registered tread depths below the critical safety threshold of 3/32 of an inch. The analysis was derived from all professional-grade inspections conducted nationwide using the company’s TireBuddy application during that seven-day period.

Industry observers suggest the actual prevalence of unsafe tyres on American roads may be significantly higher, as motorists who voluntarily participate in inspection events typically exhibit greater safety awareness than the general driving population. This self-selection bias implies that the overall percentage of worn tyres among all vehicles likely exceeds the recorded figure.

The data emerges against a backdrop of approximately 11,000 annual tyre-related traffic incidents documented by the National Highway Traffic Safety Administration, many of which involve tyres that showed no prior visible warning signs. National Tire Safety Week was established as an educational initiative to address this gap, given that gradual tread wear remains one of the most easily preventable contributors to highway accidents yet often goes unnoticed by drivers.

On 2 July 2026, Giti Tire collaborated with Anyline to host a complimentary inspection event at its North American headquarters in Charlotte, North Carolina. Participants received an artificial intelligence-powered tread measurement via the TireBuddy app alongside a pressure check, with both metrics compiled into a single visual report. The U.S. Tire Manufacturers Association advises motorists to conduct such evaluations at least once every two months.

William Estupinan, Vice President – Technical Service, Giti Tire, said, “We believe tyre maintenance education is most effective when it's personal. Providing drivers with a tread scan and air pressure reading for their own tyres brings tyre maintenance messages to life in a way that's meaningful and actionable.”

Christoph Braunsberger, CEO, Anyline, said, “Road safety is built from small, routine decisions and few are overlooked as tyre condition. National Tire Safety Week brings that risk into focus and reminds drivers how much a simple check can reveal. Our role is behind the scenes: giving the technicians who carry out inspections a more accurate, consistent way to measure tread depth. Precision like that is what safer roads are built on.”

Kuraray America Marks National STEM Day With San Jacinto College Event

Kuraray America Marks National STEM Day With San Jacinto College Event

Kuraray America, Inc. marked National STEM Day on 8 November by spotlighting a community educational event that brought together 15 of its volunteers and students from the Houston Japanese Supplementary School at San Jacinto College for a day of hands-on exploration and discovery.

Participants engaged in activities illustrating how science, technology, engineering and mathematics (STEM) converge in chemical manufacturing. Experiments with superabsorbent polymer beads explored chemistry and material properties, while a tour of the college’s facilities introduced industrial equipment. Students also learned about water filtration and distillation processes and how mathematical concepts underpin scientific and engineering applications.

One student showed particular interest in the distillation tower, linking the experience to the Kuraray Group’s contributions to everyday life and its mission of achieving for people and the planet what no one else can. The event also benefited KAI volunteers, who shared technical knowledge, exchanged perspectives and learned alongside potential future scientists and engineers.

Kuraray America thanked Reiko Fuwa and Tomohiro Tani for coordinating the visit, Hans Vandommele for sharing his expertise and all 15 KAI volunteers. The company also expressed appreciation to San Jacinto College for facility access and to the Houston Japanese Supplementary School students for their curiosity, enthusiasm and thoughtful questions.


Liberty Tire Recycling Showcases Recycling Leadership At SEMA 2026

Liberty Tire Recycling Showcases Recycling Leadership At SEMA 2026

Liberty Tire Recycling attended the 2026 SEMA Show in Las Vegas, held from 3–6 November at the Las Vegas Convention Center. The automotive aftermarket event, one of the industry's largest, drew over 160,000 attendees from the automotive, tyre and transportation sectors to review new products, technologies and business opportunities.

The Lakin Tire brand, a consistent SEMA exhibitor, once again used the show to reinforce industry relationships and present Liberty's tyre collection, recycling and sustainable resource management capabilities. Personnel from Grade/Used Tires, Commercial Truck Tires, Metals, Recycling and Collection, together with corporate and regional leadership, met customers, suppliers and industry professionals from around the world.

The booth received existing and prospective customers from numerous tyre and automotive segments during the week. Costco Wholesale Corporate Office, United Tires and UTU Wholesale were among the organisations that stopped by to examine Liberty Tire's products, services and nationwide reach. The company viewed the event as an effective forum for monitoring emerging market trends and demonstrating its position in recycling and sustainability, alongside its focus on innovation, workforce development and circular economy principles.

A memorable moment came when a high school shop teacher and students, attending through a special educator programme, toured the booth to learn about tyre recycling and industry operations. Liberty team members provided industry insights, outlined career pathways and acknowledged educators' contribution to developing future skilled trades professionals, supplying tyre inflation gauges for classroom use.

Laufenn G Fit 4S Earns ‘Good’ Rating In Auto Bild Allrad All-Season SUV Tyre Test

Laufenn G Fit 4S Earns ‘Good’ Rating In Auto Bild Allrad All-Season SUV Tyre Test

Laufenn, Hankook's associate brand, earned a ‘Good’ ratingwith an overall score of 2.2 for its G Fit 4S in the Auto Bild Allrad all-season SUV tyre test published on 8 October 2026 (issue 41). The tyre competed credibly against 11 rivals from established premium marques, finishing competitively in a 12-strong field.

Wet handling proved a particular strength, with the G Fit 4S collecting the second-highest rating shared with other models. Aquaplaning resistance also impressed, as the tyre held its line until stability began to fade at roughly 100 kmph (62 mph). In snow, it recorded the third-shortest braking distance, matching two other contenders.

Testing spanned snow, wet and dry disciplines, each weighted equally in the final ranking, with a third-generation MINI Countryman serving as the test vehicle. Snow assessments were carried out in New Zealand, while European venues hosted the wet and dry evaluations. The jury's conclusion underscored Laufenn's value-focused positioning, finding the G Fit 4S a solid option for cost-conscious buyers.

Tyres Europe Backs International Standards As Basis For Tyre Recyclability Assessment

Tyres Europe Backs International Standards As Basis For Tyre Recyclability Assessment

Tyres Europe has underscored that tyres qualify as fully recyclable under ISO 22628:2002 and UN Regulation No. 133, describing the established methodology as a robust foundation for assessing tyre recyclability. The organisation recently set out its position on the matter.

The distinction between recyclability and actual recycling rates is central to the group's argument. Recyclability refers to the technical potential of a product and its materials to be recycled, while the real rate hinges on treatment capacity and demand for secondary raw materials. Regulatory frameworks should therefore separate the two concepts clearly and align with an internationally recognised standard.

Tyres consist of rubber compounds, chemical additives and reinforcing textile and steel cords, and at end of life they are separated into rubber, textile and steel fractions, all of which existing mechanical or chemical routes can recycle. Mechanical processing yields rubber granules and powders usable as secondary raw materials across many applications, recovered textiles can be further processed and valorised, and cleaned recovered steel can re-enter metal recycling and steelmaking.

Tyres Europe pledged continued cooperation with policymakers and value-chain partners to strengthen circularity and maximise recovery of valuable tyre materials in Europe, with the full paper available on its website.