Continental Tire has announced the continuation of its sponsorship of the ‘Alive at 25’ programme, an initiative by the National Safety Council Southeastern Chapter.

The 'Alive at 25' programme aims to reduce vehicular incidents involving young drivers and address the primary cause of juvenile mortality in South Carolina, and Continental Tire has been at the forefront of this initiative since 2014. South Carolina has been dealing with traffic deaths caused by vehicle incidents involving young drivers for a long time, with the worrying statistic increasing by 26 percent between 1994 and 2022. The programme is available in over 100 public high schools throughout the Carolinas and is designed to educate young drivers aged 15 to 24 about safer driving practices, taking responsibility for their behaviour in various driving situations and being aware of peer pressure and other driving hazards.

As part of the initiative, Continental Tire and the National Safety Council Southeastern Chapter, in collaboration with law enforcement, high schools and other sponsors, aim to serve up to 500 students in five public high schools in York County. This effort includes off-duty law enforcement officials and first responders who share their own experiences with young driver crashes in the classroom.

Bill Caldwell, Senior Vice President, Continental Tire, said, “At Continental Tire, we believe in the power of giving back and making a difference where it truly matters. We understand the critical importance of road safety, especially for young drivers. Supporting initiatives like the ‘Alive at 25’ programme is our way of ensuring that these young drivers are equipped with the knowledge and skills to stay safe. We are proud to continue our partnership with the National Safety Council to make a positive impact on youth driver safety.”

Comments (0)

ADD COMMENT

Link Copied!

The Yokohama Rubber Co., Ltd. has announced the presentation of findings from an international joint research project for developing technologies to prevent and control rubber tree leaf fall diseases. Lead researcher Minami Matsui delivered a public lecture on 1 August, addressing the global history of rubber trees and collaborative measures against Leaf Fall Disease, which has significantly reduced production in affected regions.

Yokohama Rubber participates as a cooperating corporation in this initiative, which aims to achieve sustainable natural rubber production through disease management. The project has been selected under the Science and Technology Research Partnership for Sustainable Development programme, jointly implemented by the Japan Science and Technology Agency and the Japan International Cooperation Agency, with support from the Ministry of Foreign Affairs and the Ministry of Education, Culture, Sports, Science and Technology. This international effort unites Japanese and Indonesian institutions, focusing on Indonesia as the world's second-largest natural rubber producer, where Leaf Fall Disease has severely curtailed output. The research targets smallholder farmers, who account for over 90 percent of the nation's production, by utilising pesticides to combat the disease.

Minami Matsui (left) and co-researcher Emiko Kurihara, Assistant Professor at Keio University

Since the project launched in 2020, research has progressed from pesticide screening to field evaluations at institutional test farms and corporate plantations, and then to smallholder farm assessments beginning in September 2025. Throughout each phase, Yokohama Rubber has investigated pesticide residues in natural rubber latex and evaluated their effects on rubber properties, confirming that proper application does not compromise quality. All field evaluations have demonstrated the selected pesticides' effectiveness, and the project is now advancing towards the practical phase, including securing pesticide registration for Indonesian use.

This research aligns with Yokohama Rubber's Procurement Policy for Sustainable Natural Rubber, which includes supporting small-scale farmers. The company also participates as an official partner in another SATREPS project focused on utilising rubber seeds for green products to address global warming and plastic pollution.

Comments (0)

ADD COMMENT

Link Copied!

NEXEN TIRE is intensifying its transition to renewable energy across its domestic manufacturing facilities, marking a significant step in its long-term sustainability strategy. The company is advancing this effort through a combination of external power purchase agreements and the expansion of on-site solar generation at its Yangsan and Changnyeong plants.

A key component of this initiative involves a Direct Power Purchase Agreement (DPPA) inked with SK Innovation E&S, which allows the tyre manufacturer to secure renewable electricity directly from producers via a long-term contract. Beginning in November, the Yangsan plant will receive approximately four megawatts of onshore wind and solar power, with an anticipated yearly output of six gigawatt-hours. This supply is expected to cut annual greenhouse gas emissions by an estimated 2,700 tonnes of carbon dioxide equivalent.

Parallel to the DPPA, NEXEN TIRE is bolstering its self-generation capabilities. Rooftop solar systems at the Changnyeong facility, currently under lease, will be transitioned to company-owned generation as leases expire, targeting a total capacity exceeding 10 megawatts by 2028. This shift will convert roughly 9 percent of the plant’s electricity use to renewable sources, while the Yangsan plant is also evaluating similar proprietary solar installations.

Given its substantial presence in Europe and its role as an original equipment supplier to premium automakers, NEXEN TIRE faces increasing pressure from clients to lower production-related emissions. The company has already secured Science Based Targets initiative (SBTi) validation for its goal to reduce Scope 1 and 2 emissions by 58.8 percent from a 2023 baseline by 2034, reinforcing that environmental performance is now a critical competitive factor in its key markets.

John Bosco (Hyeon Suk) Kim, CEO, NEXEN TIRE, said, "The shift to renewable energy is not merely a response to regulations but a strategic investment to secure sustainable competitiveness in the global market. We will continue to expand the adoption of renewable energy across our production sites both in Korea and abroad in a phased manner."

Comments (0)

ADD COMMENT

Link Copied!

Nokian Tyres has achieved a significant milestone in the 2026 S&P Global Corporate Sustainability Assessment (CSA), securing a total score of 80 points. This evaluation examines sustainability factors that are critical to long-term corporate performance, with a strong emphasis on risk management, organisational adaptability and overall resilience. The company views this result as a clear validation of its strategic approach.

The assessment awarded the tyre manufacturer perfect scores in several key categories, including Climate Risk Management, Raw Materials Programs, Information Security Policy and Human Rights Mitigation and Remediation. Company leadership has acknowledged that this accomplishment is rooted in the deep integration of sustainable practices across daily operations, product innovation and long-term value generation.

Nokian Tyres also stressed that responsible expansion relies heavily on collaborative efforts with employees and partners, reinforcing that sustainable decisions are fundamental to building resilience in a rapidly evolving global environment.

Comments (0)

ADD COMMENT

Link Copied!

Bartell Machinery Systems has announced an expansion of its production facility in Rome, New York, aimed at increasing manufacturing capacity and reducing lead times for customers.

The company is adding 22,400 square feet of high-bay manufacturing space to its existing 152,000 sq ft site. The expansion will include 30-tonne crane capacity, designed to improve material handling, workflow efficiency and flexibility in managing work in progress.

“This expansion of our Rome, New York production facility represents an exciting and important milestone for Bartell Machinery Systems,” said Ben Lunduski, Vice President of Operations of Bartell.

The increased ceiling height will enable the company to manufacture larger and more complex equipment more efficiently. The additional vertical clearance and heavy-lift infrastructure are expected to support improved assembly processes and sequencing of large-scale projects.

Bartell said the investment is intended to increase throughput across multiple product lines, enhance scheduling flexibility and reduce bottlenecks in assembly and testing. The company also expects to expand its capacity to manage multiple projects simultaneously.

“As demand for our large industrial machinery systems continues to grow, this investment reinforces our long-term commitment to our manufacturing operations in Central New York, our customers and our employees,” said Pat Morocco, President of Bartell. “By expanding our production capabilities, we are positioning Bartell for continued success while building a strong foundation for future growth.”

The expansion is also expected to lead to an increase in the company’s workforce to support higher production volumes, contributing to employment in the local area.

Bartell, which produces equipment for the rubber and tyre, wire and cable, and oil and gas industries, said the expansion reflects sustained demand across its product lines and continued growth in recent years. Construction of the facility is at an early stage.

Comments (0)

ADD COMMENT

Link Copied!