Magna Tyres has launched the MA801 TR, a new solid tyre engineered for extreme operating conditions in recycling facilities and heavy industrial settings. Designed to maximise equipment uptime while supporting high load capacities, the tyre is built to deliver dependable performance in harsh environments. The official debut of the MA801 TR will take place at IFAT 2026 in Munich, scheduled from 4 to 7 May 2026.

The new model is intended for compact wheel loaders and telescopic handlers, featuring a flat-free solid construction. Its extra-deep non‑directional tread is reinforced by a triangular structural design, which enhances traction and stability on surfaces littered with sharp debris. Available in sizes 13.00‑24 and 14.00‑24, the tyre prioritises puncture resistance and reduced maintenance needs.

Thanks to its robust architecture and deep tread profile, the MA801 TR offers an extended service life and consistent performance across demanding work cycles. By eliminating the risk of flats, Magna Tyres positions the tyre as a reliable solution for recycling and industrial operations where continuous heavy loads are standard.

Comments (0)

ADD COMMENT

Link Copied!

ZC Rubber is preparing a major European-focused showcase at THE TIRE COLOGNE, scheduled to run from 9 to 11 June 2026. The tyre manufacturer will occupy Booth C050g in Hall 8.1, highlighting its WESTLAKE and GOODRIDE brands with a clear emphasis on products tailored specifically for regional market demands.

The display will blend imminent and future innovations. Products destined for a European launch in the latter half of 2026 will appear alongside the company’s current truck and bus radial lineup. Selected previews of developments planned for 2027 will also be on view. A featured attraction is the Westlake Sport RS2, a drift-proven ultra-high-performance tyre praised for its grip, precision and 180 treadwear rating. A renewed rubber compound, developed through work with the Red Bull Driftbrothers, now delivers steadier traction under severe driving conditions. Appearing at the stand, Red Bull Driftbrothers driver and engineer Elias Hountondji will illustrate how motorsport data directly refines ZC Rubber’s product engineering.

Additional new passenger car radial models for Europe in the second half of 2026 include the Westlake ZuperFlex Z-137, Goodride RideMax G-147, the all-season Westlake Zuper4S Z-411 and the off-road focused Westlake Terra Legend SL399 and Goodride Mud Legend SL388. On the truck and bus side, already available tyres such as the Westlake WSL2, Westlake WDL2+ and Goodride S2, D3 and D4 will be exhibited, covering steer and drive axle needs for long-haul and heavy-duty transport.

A sneak peek at 2027 offerings will feature the Westlake Z-301 commercial van tyre, Goodride All Season G-721, Goodride SnowComfort G-518 and new TBR models including the Westlake WTL2, Westlake WTR OEM and Goodride M2. ZC Rubber’s team will remain on-site throughout the event, welcoming visitors and partners to the booth for meetings and professional discussions.

Leo Liao, General Manager, ZC Rubber Europe, said, “This year’s showcase reflects a much broader and more complete portfolio for Europe. From UHP and all-season tyres to all-terrain, mud-terrain and TBR solutions, we are bringing new developments across almost every major segment. This reflects how seriously we take the European market: we are listening to local needs, investing in the right products and building a portfolio that better matches the needs of our European partners.”

Comments (0)

ADD COMMENT

Link Copied!

The Yokohama Rubber Co., Ltd. has secured validation from the Science Based Targets initiative (SBTi), a prominent corporate climate-action organisation, for its greenhouse gas (GHG) emission reduction targets set for 2035. This endorsement confirms that the company’s goals are scientifically aligned with the standards established under the Paris Agreement. The validated targets are measured relative to the company’s 2024 emission levels.

Under the approved framework, Yokohama Rubber aims for a 63.0 percent reduction in combined Scope 1 and Scope 2 emissions, which cover direct emissions from its business activities as well as indirect emissions from purchased energy. Additionally, the company commits to a 37.5 percent cut in Scope 3 emissions, specifically targeting indirect supply chain emissions from purchased products and services, along with fuel and energy-related activities not included in Scope 1 or Scope 2. To achieve these reductions, Yokohama Rubber has been expanding solar power generation and renewable energy electricity at its global plants, while also disclosing indirect emissions from product distribution, use and disposal since 2013.

The company obtained SBTi validation to accelerate supply-chain-wide emission cuts in response to intensifying climate challenges. Operating under its sustainability management slogan, ‘Caring for the Future’, Yokohama Rubber continues to create shared value by tackling social issues directly through its business operations.

Comments (0)

ADD COMMENT

Link Copied!

Pirelli has confirmed the tyre compound options for the Miami Grand Prix, with teams receiving the three softest mixtures: C3, C4 and C5. The first United States race of the Formula 1 season takes place next weekend in Florida following a lengthy break caused by the cancellation of the Bahrain and Saudi Arabian Grands Prix. The championship resumes on a street circuit built around the Hard Rock Stadium, featuring a 5.412-kilometre layout over 57 laps.

The Miami International Autodrome presents 19 corners and three long straights on asphalt resurfaced in 2023. The track surface has low roughness and gains grip as the weekend progresses. A notable characteristic observed last year was the circuit’s ability to dry very quickly, demonstrated during the Sprint when drivers switched from intermediates to slicks despite heavy rain before the start.

Fewer uncertainties are expected in race strategy due to historically limited tyre degradation in Miami, allowing drivers to extend stints and complete the Grand Prix with only a single pit stop. Neutralisations remain a factor on Sunday, as precision is crucial on any street circuit. Last year’s victory by Oscar Piastri followed a straightforward approach, with drivers splitting between Medium and Hard compounds before a mid-distance pit window.

Of the four editions held around the Dolphins’ stadium, half have been won by Max Verstappen, while McLaren drivers have shared the last two victories. Lando Norris won in 2024 followed by Piastri in 2025, though neither McLaren driver has ever secured pole position at this event. Verstappen has two poles, with the others taken by Charles Leclerc and Sergio Perez.

The entire Miami weekend operates under the Pirelli banner, as all support categories are supplied by the Italian company. The second round of Formula 2 has been relocated to Florida, joined by the McLaren Trophy North America and the Porsche Carrera Cup North America. The latter series now receives Pirelli’s P Zero DHG compound introduced last season.

The Miami podium cap, designed by Denis Dekovic for Pirelli Design, draws inspiration from a sea predator with grey shades resembling shark skin. The animal is also referenced by visor stickers depicting jaws or body. The special edition cap is already available for purchase online.

Comments (0)

ADD COMMENT

Link Copied!

Comerio Ercole recently attended three major international trade fairs, namely the Indian Rubber Expo, Chinaplas and Techtextil. These events allowed the company to present its calendering solutions while reconnecting with longstanding partners and new potential clients across various markets. The strong interest recorded at each fair facilitated valuable discussions and provided clear insights into current industry trends and evolving customer requirements.

A significant achievement during this period was receiving the Industry Pioneer Award at Chinaplas, jointly presented by Adsale Plastics Network and the fair organisers. This recognition was granted specifically for Comerio Ercole’s calendering lines designed for PVC film, honouring the company’s innovation, technical expertise and ongoing technological development.

On 15 April 2026, during National Made in Italy Day in Rome, the Italian Ministry of Enterprises and Made in Italy officially recognised 1,000 Historical Brands of National Interest. As a proud member of this exclusive registry, Comerio Ercole participated in the institutional event, reaffirming its role in strengthening the global reputation of Made in Italy. The company stands as a testament to how tradition and Italian heritage can seamlessly integrate with the demands of today’s market.

Beyond its industrial and commercial activities, Comerio Ercole has demonstrated a broader commitment to social responsibility and sustainable innovation. It donated 10 mountain bikes to the LIUC University Residence in Castellanza to support student mobility and encourage an eco-friendly lifestyle. Furthermore, the company received a national award at the 13th edition of the Premio Impresa Ambiente in the category ‘Best Process/Technology for Sustainable Development’ for its LOGOS devulcanisation system, which transforms rubber waste and end-of-life tyres into recycled compounds comparable to virgin materials while reducing emissions. This recognition affirms that industrial excellence and environmental responsibility can advance together.

Comments (0)

ADD COMMENT

Link Copied!