Pirelli All Set for Monaco Grand Prix

Pirelli All Set for Monaco Grand Prix

Pirelli is all set for the Monaco Grand Prix, a street circuit steeped in glamour and racing history since 1929. For this 3.337-kilometre layout with 19 tight corners, the Italian tyre manufacturer has selected the softest compounds in its range – C3, C4 and C5 – to provide maximum mechanical grip on the Principality’s unusually smooth asphalt surface.

The narrow carriageway follows regular urban traffic lanes, leaving virtually no run-off areas and placing safety barriers just centimetres from the racing line. Drivers frequently brush against these walls while pursuing the ideal trajectory, with average speeds the lowest of the Formula 1 season. In some sections, cars decelerate to roughly 50 kilometres per hour, making qualifying the most critical session of the weekend since overtaking is exceptionally rare.

Several sections of the track have been resurfaced for this edition, including between Turns 19 and 1, from Turn 7 to the tunnel entrance and at pit lane entry and exit. Although graining could appear, tyre behaviour is unlikely to be significantly affected because the Monaco circuit primarily subjects rubber to traction-related loads. Low degradation traditionally encourages a one-stop race strategy, though an experimental rule in 2024 forced two pit stops by requiring three different tyre sets. That regulation has since been abandoned.

Red flags and safety car periods frequently disrupt the race due to the high probability of barrier contact and the difficulty of recovering stricken cars. In 2024, an opening-lap red flag allowed all drivers to immediately fulfil the two-compound requirement, enabling a split strategy between Medium and Hard tyres for the remainder of the Grand Prix. The 2025 edition reintroduced a three-set rule, prompting most drivers to choose Medium-Hard combinations while six teams used all three compounds including the C6 Soft.

Now in its 72nd running in Monaco, the event has seen Ayrton Senna claim six victories, one more than Graham Hill and Michael Schumacher. McLaren remains the most successful constructor with 16 wins, followed by Ferrari on 10. Reflecting the Principality’s elegance, Pirelli has unveiled a special Podium Cap in deep red and champagne colours, designed by Denis Dekovic and available on the Pirelli e-commerce platform.

Kuraray America Marks National STEM Day With San Jacinto College Event

Kuraray America Marks National STEM Day With San Jacinto College Event

Kuraray America, Inc. marked National STEM Day on 8 November by spotlighting a community educational event that brought together 15 of its volunteers and students from the Houston Japanese Supplementary School at San Jacinto College for a day of hands-on exploration and discovery.

Participants engaged in activities illustrating how science, technology, engineering and mathematics (STEM) converge in chemical manufacturing. Experiments with superabsorbent polymer beads explored chemistry and material properties, while a tour of the college’s facilities introduced industrial equipment. Students also learned about water filtration and distillation processes and how mathematical concepts underpin scientific and engineering applications.

One student showed particular interest in the distillation tower, linking the experience to the Kuraray Group’s contributions to everyday life and its mission of achieving for people and the planet what no one else can. The event also benefited KAI volunteers, who shared technical knowledge, exchanged perspectives and learned alongside potential future scientists and engineers.

Kuraray America thanked Reiko Fuwa and Tomohiro Tani for coordinating the visit, Hans Vandommele for sharing his expertise and all 15 KAI volunteers. The company also expressed appreciation to San Jacinto College for facility access and to the Houston Japanese Supplementary School students for their curiosity, enthusiasm and thoughtful questions.


Liberty Tire Recycling Showcases Recycling Leadership At SEMA 2026

Liberty Tire Recycling Showcases Recycling Leadership At SEMA 2026

Liberty Tire Recycling attended the 2026 SEMA Show in Las Vegas, held from 3–6 November at the Las Vegas Convention Center. The automotive aftermarket event, one of the industry's largest, drew over 160,000 attendees from the automotive, tyre and transportation sectors to review new products, technologies and business opportunities.

The Lakin Tire brand, a consistent SEMA exhibitor, once again used the show to reinforce industry relationships and present Liberty's tyre collection, recycling and sustainable resource management capabilities. Personnel from Grade/Used Tires, Commercial Truck Tires, Metals, Recycling and Collection, together with corporate and regional leadership, met customers, suppliers and industry professionals from around the world.

The booth received existing and prospective customers from numerous tyre and automotive segments during the week. Costco Wholesale Corporate Office, United Tires and UTU Wholesale were among the organisations that stopped by to examine Liberty Tire's products, services and nationwide reach. The company viewed the event as an effective forum for monitoring emerging market trends and demonstrating its position in recycling and sustainability, alongside its focus on innovation, workforce development and circular economy principles.

A memorable moment came when a high school shop teacher and students, attending through a special educator programme, toured the booth to learn about tyre recycling and industry operations. Liberty team members provided industry insights, outlined career pathways and acknowledged educators' contribution to developing future skilled trades professionals, supplying tyre inflation gauges for classroom use.

Laufenn G Fit 4S Earns ‘Good’ Rating In Auto Bild Allrad All-Season SUV Tyre Test

Laufenn G Fit 4S Earns ‘Good’ Rating In Auto Bild Allrad All-Season SUV Tyre Test

Laufenn, Hankook's associate brand, earned a ‘Good’ ratingwith an overall score of 2.2 for its G Fit 4S in the Auto Bild Allrad all-season SUV tyre test published on 8 October 2026 (issue 41). The tyre competed credibly against 11 rivals from established premium marques, finishing competitively in a 12-strong field.

Wet handling proved a particular strength, with the G Fit 4S collecting the second-highest rating shared with other models. Aquaplaning resistance also impressed, as the tyre held its line until stability began to fade at roughly 100 kmph (62 mph). In snow, it recorded the third-shortest braking distance, matching two other contenders.

Testing spanned snow, wet and dry disciplines, each weighted equally in the final ranking, with a third-generation MINI Countryman serving as the test vehicle. Snow assessments were carried out in New Zealand, while European venues hosted the wet and dry evaluations. The jury's conclusion underscored Laufenn's value-focused positioning, finding the G Fit 4S a solid option for cost-conscious buyers.

Tyres Europe Backs International Standards As Basis For Tyre Recyclability Assessment

Tyres Europe Backs International Standards As Basis For Tyre Recyclability Assessment

Tyres Europe has underscored that tyres qualify as fully recyclable under ISO 22628:2002 and UN Regulation No. 133, describing the established methodology as a robust foundation for assessing tyre recyclability. The organisation recently set out its position on the matter.

The distinction between recyclability and actual recycling rates is central to the group's argument. Recyclability refers to the technical potential of a product and its materials to be recycled, while the real rate hinges on treatment capacity and demand for secondary raw materials. Regulatory frameworks should therefore separate the two concepts clearly and align with an internationally recognised standard.

Tyres consist of rubber compounds, chemical additives and reinforcing textile and steel cords, and at end of life they are separated into rubber, textile and steel fractions, all of which existing mechanical or chemical routes can recycle. Mechanical processing yields rubber granules and powders usable as secondary raw materials across many applications, recovered textiles can be further processed and valorised, and cleaned recovered steel can re-enter metal recycling and steelmaking.

Tyres Europe pledged continued cooperation with policymakers and value-chain partners to strengthen circularity and maximise recovery of valuable tyre materials in Europe, with the full paper available on its website.