TyreSafe, UK’s charity dedicated to raising tyre safety awareness, has issued a fresh warning to owners of caravans, motorhomes and trailers as vehicles emerge from winter storage, highlighting a significant rise in towing-related incidents across UK roads. New data reveals that between 2022 and 2024, there were over 16,700 incidents involving towed vehicles on the Strategic Road Network, with a 16 percent increase over that period. The majority were breakdowns, and trailers made up the largest proportion, followed by caravans and horseboxes. With nearly four out of five such incidents classed as breakdowns and many considered preventable, TyreSafe stresses that tyre condition and air pressure are essential checks after prolonged periods out of use.

Tyres can deteriorate while stationary, even when they appear undamaged. Air pressure often drops during storage, and combined with rubber degradation, this greatly raises the risk of failure once back on the road. For caravan owners, under-inflated tyres can lead to instability or snaking, especially in crosswinds or when passed by large vehicles, while the extra flexing increases the chance of tread separation under heavy loads. Motorhomes face distinct risks due to their heavier, permanently laden construction, which places sustained strain on tyres. A blowout can be harder to control given the higher centre of gravity, and flat spotting from long storage periods may cause internal damage that manifests as vibration at speed. Horseboxes and trailers stored for extended intervals are equally vulnerable, as tyres can suffer internal weakening without visible signs.

Correct tyre pressure on the towing vehicle is just as critical. Under-inflated rear tyres can cause the vehicle to sag under nose weight, altering weight distribution and reducing steering precision and braking effectiveness. Pressures should always be adjusted according to manufacturer recommendations for towing loads. Motorhome owners must also pay attention to CP-marked tyres, which are specifically designed for camping vehicles and often require significantly higher pressures—sometimes up to 80 PSI—compared to standard car tyres. Using lower car-type pressures leaves them dangerously under-inflated, leading to excess heat, sidewall stress, and potential failure.

Tyres that have lost pressure are more prone to overheating, rapid wear and sidewall cracking, which occurs when rubber polymers degrade. Cracking can appear on the sidewall or tread even in lightly used tyres, particularly if storage conditions are poor, and can compromise structural integrity over time. Factors such as air loss while stationary, oxidation, UV and temperature extremes, ozone exposure and improper storage all contribute to deterioration. Unlike regularly used vehicles, stored vehicles miss out on the benefits that help maintain tyre flexibility and pressure stability.

TyreSafe urges road users to embrace the simple ACT protocol: regular checks of air pressure, condition and tread depth.

Stuart Lovatt, Chair of TyreSafe, said, “With towing incidents rising, tyre safety has never been more important. Air pressure naturally reduces over time, and tyres that are both under-inflated and degraded are far more likely to fail. When towing or driving a motorhome, tyres operate under higher loads and stresses, so even small weaknesses can have serious consequences.”

Sarah Smithurst MBE, Chief Operating Officer, NTTA, said “Many caravans, trailers and horseboxes spend months in storage over the winter, and during that time, tyres can slowly lose pressure or begin to deteriorate without the owner realising. Because these tyres are often carrying heavy loads when they return to the road, even small issues can quickly become serious safety risks.

“Before towing for the first time each season, owners should take the time to check tyre pressures against the manufacturer’s recommendations and carefully inspect the tyres for signs of cracking, damage or excessive wear. It’s also important not to overlook the tyres on the towing vehicle itself, as they play a vital role in maintaining stability and control when towing. A few simple checks before setting off can make a significant difference to safety and help prevent avoidable breakdowns or incidents on the road.”

Comments (0)

ADD COMMENT

Link Copied!

Comerio Ercole maintained a busy international exhibition schedule throughout June 2026, following its successful participation at INDEX Geneva in May. The company showcased its latest innovations for the plastics and rubber sectors at PLAST 2026 in Milan. The tour progressed to São Paulo, Brazil, for Expobor & Pneushow 2026, Latin America’s most significant rubber and tyre industry fair. This event served as a platform to reinforce ties with established local clients, engage with potential partners and discuss future collaborations.

The firm also attended Saudi Plastics & Petrochem 2026 in Riyadh, a critical gathering for the Middle Eastern petrochemical market. The exhibition underscored rising regional interest in sophisticated processing technologies, consolidating Comerio Ercole’s footprint in an area investing heavily in industrial expansion.

The company hosted an official delegation from Svilajnac, Serbia, at its Busto Arsizio headquarters to bolster economic and industrial exchanges between the regions. Comerio Ercole presented its expertise in rubber and plastics machinery while fostering dialogue on innovation and future partnerships. The company thanked the Municipality of Busto Arsizio and participating organisations for facilitating the exchange.

The newly launched JET – Joint Embossing Technological Center, a venture with the Italian SIMEC Group, has attracted attention within the technical materials industry. The market outlook for the first half of 2026 remains positive, with sustained investments from tyre and rubber clients complemented by growing opportunities in plastics processing. With numerous global projects underway, Comerio Ercole acknowledged the trust placed in its engineering capabilities by customers and partners, whose collaboration remains central to its growth.

Comments (0)

ADD COMMENT

Link Copied!

Continental has been awarded a gold medal in the 2026 EcoVadis Sustainability Rating, securing 84 points out of 100. This elevates the automotive supplier into the global top five percent of companies scrutinised by the Paris-based organisation. The evaluation marked a shift, as the company was examined for the first time under the ‘manufacture of rubber tyres and tubes’ classification, having previously been benchmarked under ‘parts and accessories’.

The highest scores came in environmental stewardship and labour practices, with 86 points earned in each. EcoVadis analysts weighed climate action plans, management frameworks and public sustainability disclosures. The firm's certification portfolio, procurement policies and execution of internal processes also contributed to the final rating.

Continental has boosted renewable and recycled input utilisation to 28 percent of tyre production materials as of 2025, with a roadmap calling for 40 percent by decade's end. Current lines incorporate reclaimed polyester from plastic bottles, repurposed steel, silica from agricultural ash and synthetic rubber from circular feedstocks. The group is intensifying supply web oversight through certified sourcing and binding sustainability clauses for primary vendors.

Absolute carbon output from tyre manufacturing has dropped by roughly 180,000 metric tonnes over four years, driven by cleaner energy carriers. In early 2026, Continental permanently ceased coal and heavy fuel oil combustion across its global footprint. Plants now generate process steam via green electricity, biomass, biogas and a mix of LPG and natural gas for grid stability. Since 2007, EcoVadis has expanded to over 150,000 rated entities, offering a digital platform for buyers and suppliers to compare supply-chain sustainability performance.

Jorge Almeida, Head of Sustainability for Continental’s Tires group sector, said, “Even in our new industry category, with its different assessment criteria, we continue to rank among the top 5 percent of companies worldwide. Our particularly strong score in the environment theme highlights the measures and management approaches we have implemented to achieve our sustainability targets – from using renewable and recycled materials to further reducing emissions at our plants.”

Comments (0)

ADD COMMENT

Link Copied!

The Association of Natural Rubber Producing Countries (ANRPC) is convening a major sustainability forum in Kochi, India, on 19 August 2026. The day-long event, running from 9:00 AM to 4:30 PM IST at the Crowne Plaza, represents a critical milestone for the natural rubber sector. Building upon the foundational discussions from the 2025 ANRPC meetings and the recent COP30 conference, the forum will unite member governments, industry leaders, non-governmental organisations and compliance bodies to advance a unified sustainability agenda.

The core objective of the gathering is to secure endorsement for the ANRPC’s Sustainable Natural Rubber Guidelines. A primary focus will be on deploying open-source traceability tools designed to facilitate compliance with the European Union Deforestation Regulation while ensuring that these measures do not impose additional financial burdens on smallholders and small-to-medium enterprises. The thematic discussions will be structured around environmental responsibility, including net-zero strategies, economic sustainability to protect smallholder livelihoods and fair pricing and market adaptation through sustainable finance for emerging sectors like electric vehicles and green construction.

The programme will feature five dedicated sessions covering net-zero pathways, national progress reports from India, Malaysia and Thailand and industry case studies from Indonesia, Cambodia and Vietnam. A key panel discussion will see government representatives and supply chain actors making future commitments. Attendance is targeted at ANRPC member states, supply chain stakeholders, rubber associations, environmental groups and relevant compliance organisations.

Comments (0)

ADD COMMENT

Link Copied!

Tolins Tyres Ltd has announced that its wholly owned subsidiary, Terra Rubber Pvt Ltd, has entered into a purchase agreement with Cochin Reclaim and Rubbers Pvt Ltd to acquire plant and machinery as part of its capacity expansion and backward integration strategy.

The agreement, executed on 1 July 2026, involves the purchase of identified plant and machinery from Cochin Reclaim, an unrelated third party. According to the company, the acquisition is intended to strengthen Terra Rubber's manufacturing capabilities through increased capacity and greater backward integration.

Under the terms of the agreement, Terra Rubber will acquire the machinery on an "as-is, where-is" basis. The subsidiary is required to remove the equipment from Cochin Reclaim's premises within 60 days at its own expense. Ownership of each item will transfer only after full payment has been made and the machinery has been physically removed.

Tolins Tyres said the transaction is a routine purchase undertaken in the ordinary course of business and will have no impact on the management or control of the listed company. It added that neither Terra Rubber nor Tolins Tyres holds any shareholding in Cochin Reclaim.

The company also confirmed that the transaction is not a related-party transaction, has been negotiated on an arm's length basis, and that Cochin Reclaim has no relationship with the company's promoter group or board of directors.

Comments (0)

ADD COMMENT

Link Copied!