Apollo Tyres has become the first company in India to be awarded 5 stars for its Apollo brand of light truck radials. 

Multiple SKUs of 16-inch Apollo Endurace RA and LD have received 5-star ratings from the Bureau of Energy Efficiency (BEE), while a few of them have also received 4-star ratings.

Commenting on the same, Satish Sharma, President, Asia Pacific, Middle East and Africa (APMEA), Apollo Tyres Ltd, said, “BEE’s label programme provides the customers’ information on fuel/energy savings, and helps them take an informed buying decision. The savings on fuel/energy, which is the highest cost for this category of consumers, optimises their entire cost of operation. We are the leaders in the CV category, especially in the light truck radials, and this star rating would help us further dominate the segment.”

The tube type radial range includes Apollo EnduRace RA, which is for steer axle or all-wheel fitment, and Apollo EnduRace LD for drive axle fitment. These variants cater to all the regional transportation needs of domestic customers, having 4x2 trucks with up to 9-tonne load-carrying capacity for their short and long haulage applications across the country. In addition to the trucks, these tyres are a preferred fitment in the passenger segment for Schools and Tourist buses. The company also supplies these tyres to major OEMs like Tata Motors, Ashok Leyland, VECV and Mahindra.

The Steer/All wheel tread pattern, EnduRace RA is designed with sinusoidal groove base with rib tapers to provide better stability and control for vehicle manoeuvring and low rolling resistance. The stress-relieving sipes facilitate uniform wear, while the optimised contact pressure reduces the noise. The EnduRace LD tread pattern is designed with robust blocks providing drive axle traction in heavy load applications with smooth wear, reduced heat and improved cut and chip resistance. The casings of these tyres are made with tension optimised cords, with lower fatigue to maximise durability for multi-life performance. The superior combination of compound, pattern design and casing durability – yield these 5 stars rated tyres with better fuel efficiency, giving desired value for money to each customer and enabling them to go the distance without compromising on the mileage and durability.

Comments (0)

ADD COMMENT

Link Copied!

Tegeta Green Planet and Shine Energy, both affiliated with Tegeta Holding, have launched a joint educational initiative to raise environmental awareness and a sense of responsibility among young people. The project addresses modern challenges such as environmental protection and sustainable development.

Company representatives are visiting schools across Tbilisi to hold informational meetings, presentations and workshops. The programme begins with presentations, followed by interactive games and activities designed to help students retain the information. At the end of each session, participants receive symbolic gifts and prizes as motivation.

Tegeta Green Planet focuses on teaching students the principles of specific waste management, including how to properly handle used tyres, batteries and oils. The sessions explain why proper waste management is essential for environmental protection and how it connects to the circular economy. Meanwhile, Shine Energy educates young people on the importance of energy, its everyday use and why developing renewable and sustainable energy resources is crucial.

The initiative is not limited to schools. In the near future, both organisations will expand their efforts to universities, aiming to broaden awareness about environmental protection, waste management and energy efficiency. The ultimate goal is to foster environmentally responsible attitudes among the younger generation, helping build a more sustainable and conscious society.

Comments (0)

ADD COMMENT

Link Copied!

Zeon has been recognised as a Supplier Engagement Leader in the 2025 Supplier Engagement Assessment (SEA) conducted by CDP, a United Kingdom-based international environmental nonprofit organisation. This achievement represents the first time the company has received the highest possible rating in this assessment.

The evaluation measures how corporations address climate change within their supply chains, focusing on responses to the CDP Climate Change Questionnaire across five critical areas. These include governance, emissions targets, Scope 3 emissions management, risk management and overall supplier engagement strategies.

Zeon earned the top rating for its efforts to reduce greenhouse gas emissions through supplier collaboration, a group-wide initiative, alongside continuous dialogue maintained via procurement activities. Guided by its philosophy of contributing to planetary preservation and human prosperity, Zeon remains committed to sustainable management. The company reaffirmed that it will continue working with suppliers and other stakeholders to tackle climate change and meet societal expectations.

Comments (0)

ADD COMMENT

Link Copied!

German chemical group WACKER has announced a price increase of up to 15 percent for its resins, dispersions and dispersible polymer powders produced at its European and US facilities. The adjustment takes effect on 1 June 2026, or as existing customer contracts permit. The move is designed to allow the company’s Polymers division to maintain high product quality, deliver technological innovations and provide superior customer service and technical support. It will also support investments aimed at securing future growth in key markets.

Rising costs for raw materials and logistics have forced the pricing measure, with the Polymers division being particularly affected. The recent conflict in the Middle East has caused significant disruptions across global commodity markets. As a direct result, prices for energy, raw materials and transportation have climbed sharply.

Despite the increase, WACKER remains focused on sustaining its commitment to customer support and long-term capability. The company underscored that the adjustment is necessary to continue meeting market demands while ensuring operational stability and future-oriented development across its focus markets.

Comments (0)

ADD COMMENT

Link Copied!

Pirelli North America has launched its first closed-loop circular recycling initiative, marking a significant step in the company’s broader strategy to increase recycled and bio‑based content in its tyre production. The project has received the Tire Recycling Foundation’s Value Chain Collaboration Award.

The programme recovers scrap tyres generated during Pirelli’s own North American manufacturing process. These materials are sent to Bolder Industries, which applies ISCC PLUS‑certified pyrolysis technology to produce BolderBlack recovered carbon black. Pirelli then reintroduces this material into new tyre production at its North American facilities, partially replacing virgin carbon black. The effort is part of a wider Pirelli plan to expand such industrial ecosystems across the group’s production network, aiming to valorise waste by reintegrating recovered materials into tyre manufacturing.

Beyond the award, the initiative reflects Pirelli’s broader circularity approach, which includes ongoing work to boost recycled and bio‑based material usage. The company targets over 80 percent bio‑based and recycled content in its best‑performing products and forty percent in total production by 2030.

Claudio Zanardo, CEO, Pirelli North America, said, "The Rome plant is one of the most technologically advanced manufacturing facilities in Pirelli. This initiative reflects an approach focused on increasing the use of recovered materials within existing production processes. It is part of a broader effort to gradually integrate raw materials derived from recycled resources into our products while maintaining consistency in performance and quality."

Tony Wibbeler, CEO, Bolder Industries, said, "Our collaboration demonstrates that a traceable, mass-balance approach to tyre-to-tyre circularity is not only achievable, but it's ready to scale inside a premium manufacturing environment, meeting real performance and certification requirements at every step. This is the kind of progress the industry has been working toward for many years."

Comments (0)

ADD COMMENT

Link Copied!