Goodyear Racing has retained its three-star rating within the FIA’s Environmental Accreditation Programme for 2026, securing the highest possible distinction for environmental management in motorsport. The renewal affirms that the company’s racing division operates at best-practice standards, as defined by the governing body of world motor sport and mobility organisations.

The renewed status follows an accelerated push by Goodyear to embed sustainability throughout its racing operations, spanning manufacturing, product development, logistical support and on-track activities. Auditors confirmed top-level commitment to environmental goals, supported by an integrated management system ensuring consistent implementation and ongoing refinement.

Goodyear Racing EMEA’s portfolio, including its role as official tyre supplier for the FIA World Endurance Championship, the 24 Hours of Le Mans, the European Le Mans Series and the Goodyear FIA European Truck Racing Championship, falls under the accreditation. Initiatives include renewable electricity at Hanau and Colmar-Berg facilities, ISO certifications, single-specification tyre strategies, increased virtual simulation, retreading practices and a take-back system diverting tyres from landfill.

These measures support long-term targets of 100 percent renewable energy in manufacturing by 2040 and net-zero emissions across its value chain by 2050. Recent innovations include the 2027-generation EAGLE racing tyres with 66 percent sustainable materials for LMGT3 and a truck racing specification featuring up to 60 percent sustainable content.

Originally awarded the three-star FIA accreditation in 2024, Goodyear continues using motorsport as a testing ground for sustainable technologies. The latest developments demonstrate a strategic vision where racing accelerates innovations that transition to road applications, showing measurable progress and enduring commitment.

Xavier Fraipont, Vice-President, Goodyear Racing, said, “Renewing the FIA’s highest level of environmental accreditation is a strong validation of the progress we have made in embedding sustainability across our racing operations. Over the past years, we have focused our efforts at every level – from how we design and manufacture our tyres to how we operate at the track. Crucially, we are proving that there is no trade-off between performance and a more responsible approach: the two go hand in hand. Motorsport has always been a driver of innovation, and today it also plays a key role in advancing more sustainable mobility. We remain fully committed to building on this progress together with our partners, continuing to push the boundaries of both performance and sustainability.”

Marek Nawarecki, Senior Circuit Sport Director, FIA, said, "Goodyear's renewed Three-Star Accreditation reflects exactly the kind of sustained, credible commitment the FIA Environmental Accreditation Programme is designed to recognise. By embedding sustainability from manufacturing through to trackside operations, Goodyear has demonstrated measurable, lasting progress. It's encouraging to see this level of commitment from a key partner in both the FIA World Endurance Championship and the Goodyear FIA European Truck Racing Championship.”

Pierre Fillon, President, Automobile Club de l’Ouest, said, “We would like to warmly congratulate Goodyear on the renewal of its FIA Three-Star Environmental Accreditation, the highest level of recognition within the FIA’s Environmental Accreditation Programme. This achievement reflects the commitment of a major partner of endurance racing, demonstrating that performance and a more responsible approach can progress together. Alongside the ACO, Goodyear plays an important role in developing innovative solutions for motorsport. Endurance racing has always been a laboratory for progress. It must continue to be so, not only in terms of performance but also in supporting the transformation of mobility. This is the spirit of our collaboration with Goodyear.”

Comments (0)

ADD COMMENT

Link Copied!

Birla Carbon will use its presence at RubberTech China 2026 to demonstrate how its operations across Asia, including China, are being scaled up to meet demand from both regional and international customers. The manufacturer of high-quality carbon materials will exhibit at the Shanghai New International Expo Center from 15 to 17 September 2026 at Booth No. W5B467.

Growth in manufacturing capacity and geographic reach underpins the company's push for greater supply reliability, responsiveness and consistency. Thailand's Rayong facility and an additional high-output Indian plant both commence operations this year. Across key Asian markets, these additions bolster dependable volume availability, sharpen the company's ability to react swiftly to changing customer demands and shorten delivery timelines by operating nearer to buyers.

A broad solutions portfolio awaits exhibition attendees. Engineered materials for mechanical rubber goods (MRG) deliver enhanced hose durability, superior belting abrasion resistance and reliable performance in anti-vibration and sealing systems. Tyre-focused carbon black grades extend product lifespan while improving fuel and energy efficiency, with Euro 7-inspired and EV-designed options covering PCR, LT and TBR applications. Low PAH grades hold certification for skin-contact and export markets, functioning as drop-in ASTM replacements. Continua SCB and SCM products permit elevated recycled and bio-based content as drop-in substitutes for conventional ASTM grades, assisting customers in advancing circularity goals without sacrificing performance.

Amit Kumar, President, Asia, Birla Carbon, said, “The Asia region is increasingly viewed as a manufacturing hub for the world, with China playing a central role in the growth of high-value MRG and tyre markets.  This is making performance, supply reliability and sustainability more critical than ever for the region. At Birla Carbon, we are strengthening our regional material capacity and footprint to be closer to our customers and respond more effectively to their evolving needs. With expanded capacity and innovative solutions spanning MRG, tyres, including Euro 7-inspired and EV-designed performance materials low PAH applications, and sustainable offerings, we are well positioned to help customers enhance product performance, build more resilient supply chains and advance their sustainability goals.”

Comments (0)

ADD COMMENT

Link Copied!

Bridgestone has expanded its road safety efforts in Scotland by hosting its inaugural dedicated tyre safety event in the region. The initiative, held at Betty’s Diner off Westfield Road in Motherwell, drew such a strong response from local motorists that additional visits north of the border are already being arranged.

Working alongside Auchinlea Tyres, the company inspected over 100 tyres during the event while offering drivers guidance on tyre safety and the value of routine checks and maintenance. The results underscored the need for such efforts, with 16 percent of tyres requiring urgent attention and a further 24 percent flagged for close monitoring.

To encourage awareness of basic tyre checking practices, ‘Become a Bridgestone Road Safety Hero’ bags were distributed, and the firm’s branded VW Buzz drew considerable interest when parked at the site. Organised by Chris Liddle, Key Account Manager for Consumer and Commercial Products, the event forms part of Bridgestone’s wider Become a Road Safety Hero campaign, which sees colleagues across the UK engaging with motorists to promote essential tyre safety messages.

Recent data reinforces the campaign’s urgency. TyreSafe estimates that 6.1 million tyres on UK roads are illegal or dangerously worn at any given time, often because tread depth falls below the 1.6 mm legal limit. Meanwhile, the Department for Transport’s Reported Road Casualties Great Britain: Final Results 2025 report showed that people killed or seriously injured in collisions involving illegal, defective or underinflated tyres rose from 169 in 2024 to 201 in 2025. For Bridgestone, events like the Scottish check transform safety messaging into practical advice, letting motorists have their tyres inspected while learning simple self-checks.

Liddle said, “This was a really important event for us because it was the first time we have taken our road safety outreach into Scotland in 2026 and the response was fantastic. We inspected 25 vehicles and 100 tyres during the event, giving us a great opportunity to speak directly to motorists about the importance of checking their tyres and making sure they are safe and properly maintained. The feedback we've received since our visit has been extremely positive, and we've already been asked if   we could hold similar events with Auchinlea Tyres. That's a great indication of how successful the day was. We're now looking at the possibility of taking the Road Safety Buzz to different locations across Scotland before the end of the year, working with Scottish dealers to help engage local communities. The Buzz certainly attracted plenty of attention. It's a real head-turner and a great way of starting conversations with people about tyre safety.”

Comments (0)

ADD COMMENT

Link Copied!

Maxion Wheels has reaffirmed its dedication to responsible business practices, operational excellence and environmental stewardship by strengthening a resilient and sustainable global supply chain. The company emphasises that collaboration with suppliers sharing its values is vital for delivering long-term value to customers, communities and stakeholders while maintaining high expectations for performance in quality, delivery, sustainability, innovation and ethical conduct. The 2025 Maxion Wheels Supplier Awards recognise exceptional partners whose contributions have advanced the business and reinforced its supply chain worldwide.

Among the honourees, Akzo Nobel Coatings Ltda of Brazil received the Supplier of the Year award for the Americas. A global leader in paints and coatings, AkzoNobel supports Maxion facilities in Brazil and Argentina with liquid and powder coating technologies. In 2025, it earned an ‘A’ rating in the annual Supplier Performance Evaluation for its commitment to quality, innovation, sustainability and supply reliability.

For Asia, JSW Steel Limited of India was named Supplier of the Year. Part of the O.P. Jindal Group, JSW Steel is one of India’s leading steel manufacturers, with an annual production capacity of 35 million tonnes across six plants. As a strategic partner for Maxion India, it supports product development, operational flexibility and business growth. Its senior leadership engagement and strong collaboration helped it meet all environmental, social and governance requirements, securing an ‘A’ rating.

In the EMEA region, FreiLacke, a brand of Emil Frei GmbH & Co KG, received Supplier of the Year honours. The family-owned German coatings specialist, based in the Black Forest, supplies powder and liquid coatings to several Maxion aluminium wheel plants and supports development for both aluminium and steel applications. FreiLacke achieved Supplier Performance Evaluation scores above 97 and met all quality, ESG and governance requirements, earning an ‘A’ rating.

The Green Wheel Award for 2025 went to Akzo Nobel Coatings CZ of the Czech Republic. Based in Opava, the company is part of the AkzoNobel group and serves as a key supplier to Maxion Wheels Ostrava, providing high-quality coating solutions for wheel manufacturing while demonstrating responsible business practices.

Akzo Nobel Coatings CZ was recognised for outstanding sustainability performance, achieving a Supplier Performance Evaluation sustainability score of 24 out of 25 and full compliance with Maxion’s ESG, governance and responsible sourcing requirements. Supported by AkzoNobel’s ambitious sustainability agenda and strong transparency, the company exemplifies leadership in environmental stewardship and sustainable value creation across the supply chain.

Pia Schütz, Vice President – Global Purchasing, Maxion Wheels, said, “At Maxion Wheels, we view our suppliers as strategic partners in our success. Their dedication to quality, innovation, sustainability and operational excellence enables us to better serve our customers and continuously improve our performance. These awards recognise organisations that have distinguished themselves through exceptional collaboration and a shared commitment to creating long-term value.”

Comments (0)

ADD COMMENT

Link Copied!

Hankook Tire has renewed its FIA Three-Star Environmental Accreditation, retaining the highest rating awarded under the Fédération Internationale de l’Automobile’s environmental certification framework. The renewal follows a rigorous assessment by FIA Sustainability, with final approval securing the accreditation through July 2028. Hankook first earned the distinction in 2024 while serving as exclusive tyre supplier and official partner of the ABB FIA Formula E World Championship.

The FIA programme evaluates environmental management across motorsports and mobility, covering performance, energy reduction, logistics efficiency, waste optimisation and carbon neutrality initiatives. Hankook’s renewed status confirms that its motorsport environmental systems satisfy FIA standards. The company has also conducted life cycle assessments for Formula E tyres, spanning raw material procurement, manufacturing and transportation, while tracking carbon footprints throughout production.

Beyond racing, Hankook’s Geumsan Plant became Korea’s first tyre facility to obtain ISCC PLUS certification in 2021. The certification has since expanded to plants in Hungary, Daejeon and Jiaxing, China. The company has additionally secured a long-term renewable energy power purchase agreement for its Hungary Plant and installed solar systems for on-site use at Geumsan, Chongqing and Jiaxing.

Hankook plans to keep reviewing and strengthening ESG management and environmental capabilities across its unified global brand. The renewed accreditation reaffirms the company’s commitment to sustainable motorsport operations while advancing broader environmental goals throughout its international manufacturing network.

Willem Groenewald, FIA Secretary General for Automobile Mobility, Sustainability and Tourism, said, “Congratulations to Hankook on renewing its FIA Three-Star Environmental Accreditation. Earning our highest environmental standard once is an achievement; renewing it shows a commitment that runs deep. As a Global Partner of the FIA, Hankook shares our belief that motor sport can drive innovation from the track to the road, and this renewal is a fitting reflection of the partnership we are building together.”

Comments (0)

ADD COMMENT

Link Copied!