TyreSafe has issued a fresh warning to families during Child Safety Week, emphasising that protecting children on the road requires attention beyond just child car seats. The road safety charity urges parents and carers to consider the entire vehicle’s condition before every journey, particularly the tyres, which are critical for braking, grip and overall control.

The organisation stresses that while correctly fitted child restraints offer vital protection during a collision, vehicle safety begins before a crash ever occurs. Worn, damaged or underinflated tyres can significantly increase stopping distances and compromise a vehicle’s ability to respond in an emergency, undermining the protection that child seats are designed to provide.

This guidance aligns with the government’s new Road Safety Strategy, which aims to reduce road deaths and serious injuries by 65 percent overall and by 70 percent for children under 16 by 2035. TyreSafe notes that achieving these targets depends on a Safe System approach, where multiple layers of safety work together. Recent data from Good Egg Safety CIC community checks reinforces this point, revealing that approximately two thirds of inspected child restraints are incorrectly fitted or unsuitable due to issues such as slack seat belts, loose bases, misrouted belts or improperly adjusted support legs and carry handles.

To help families act, TyreSafe promotes its simple ACT checklist. Air pressure should be checked regularly against the vehicle manufacturer’s recommended levels. Condition must be inspected for cuts, bulges, cracks or embedded objects. Tread depth must meet the legal minimum of 1.6 mm with no uneven wear. These checks are especially important given that children must use an appropriate car seat until age 12 or until they reach 135 centimetres in height.

As part of Child Safety Week, TyreSafe is supporting local initiatives across UK, including free child car seat checking events in West Yorkshire delivered with West Yorkshire Vision Zero and Good Egg Safety CIC. Selected sessions will also offer free tyre safety checks and practical advice. TyreSafe encourages families to attend such events and remember that every part of the journey matters when it comes to protecting children on the road.

Stuart Lovatt, Chair of TyreSafe, said, “A correctly fitted child seat offers vital protection, but it is only one part of the safety picture. Tyres are the only contact between the vehicle and the road and have a direct impact on braking, grip and control. If tyres are not properly maintained, stopping distances increase and vehicle performance can be affected – particularly in emergency situations or poor weather conditions. Keeping children safe means looking at the whole journey and the whole vehicle. Simple checks can make a significant difference.”

Janis James MBE, Chief Executive of Good Egg Safety CIC, said, “Parents and carers go to extraordinary lengths to protect the children they love, yet our national data consistently shows that around two thirds of child car seats are being used incorrectly – often by caring families who simply don’t realise something is wrong. The encouraging news is that many of the issues we identify can usually be corrected quickly with the support of our highly experienced and accredited Safety Advisors, potentially making a life-saving difference in the event of a collision. By working alongside TyreSafe at selected events, we are supporting the wider Safe System approach – helping families stay safer both inside and outside the vehicle.”

Comments (0)

ADD COMMENT

Link Copied!

MICHELIN Connected Fleet has introduced an artificial intelligence (AI) assistant directly within its MyConnectedFleet web platform, designed to enhance operational efficiency for fleet managers. The new tool delivers immediate, data-driven responses to user queries, significantly reducing the time traditionally spent on manual research and data compilation. By integrating seamlessly into the existing portal, the assistant provides a streamlined approach to managing complex fleet information.

The AI system transforms raw fleet usage data into actionable insights, enabling managers to make quicker, more informed decisions. It supports a wide range of practical requests, from generating reports on driver fuel efficiency and identifying trucks requiring tyre maintenance to checking vehicle availability and calculating monthly fuel costs. The assistant is built as a closed, secure system to ensure the confidentiality of all fleet data, addressing key concerns about information security.

Functioning as a comprehensive partner for managers of heavy goods vehicles, passenger transport and light commercial vehicles, the tool offers real-time analysis of fuel consumption, driver behaviour and journey metrics. It provides immediate answers for both simple safety and cost-related questions and more complex analytical tasks, presenting findings in text or visual formats. Future updates to the solution will be guided by direct customer feedback, ensuring its continuous evolution.

The MICHELIN AI Assistant is currently available to customers across 10 countries, including United Kingdom, United States and several European nations. It leverages over a century of mobility expertise and three decades of data science experience, responding to the belief of most fleet managers that AI will transform their sector. The assistant can also be paired with other technologies, such as onboard cameras and tyre inspection systems, to form a cohesive, practical solution for modern fleet operations.

Sophie Foucque, CEO, MICHELIN Connected Fleet, Europe, Africa and Australia, said, “The AI Assistant is the natural evolution of our DNA, which is built around supporting our customers. Co-developed with some of our largest customers, it offers a more intuitive way to interact with vehicle usage data while removing the need to generate multiple reports. Augmented fleet managers can therefore focus fully on the performance of their operations.”

Comments (0)

ADD COMMENT

Link Copied!

Continental Tires Americas has introduced Sensor Ready commercial tyres, designed to streamline digital monitoring for fleets of all sizes. Leveraging over a decade of expertise and more than 121,000 connected wheel positions in the Americas, the company continues expanding its data-driven portfolio. The initial rollout features the Conti Coach HA3 product line, underscoring the manufacturer's commitment to digital-first solutions.

A defining characteristic is the integration of a dedicated sensor pocket directly into the tyre during curing, eliminating aftermarket gluing that previously took up to 14 minutes per installation. The pocket securely holds Continental's proprietary sensor, a key ContiConnect ecosystem component that transmits critical metrics like pressure, temperature and mileage. A clear Sensor Ready logo on the sidewall provides immediate visual confirmation of compatibility for fleets, dealers and retreaders.

The new system significantly reduces installation time and labour requirements at maintenance facilities and retread shops while ensuring consistent, reliable sensor placement. Fleets can choose tyres with sensors pre-installed from the factory or opt for quick, tool-free installation later. The Sensor Ready logo facilitates swift decision-making across the tyre's lifecycle, and the integrated pocket remains intact during retreading, allowing efficient sensor reinstallation without compromising casing performance.

Digital monitoring delivers measurable business impact, including reduced fuel consumption, extended tyre life and fewer roadside incidents. For smaller operations, Continental offers ContiConnect Lite, a mobile application providing a plug-and-play monitoring solution. This advancement reinforces Continental's vision of a connected, intelligent tyre ecosystem that enhances safety, sustainability and cost management.

Renato Sarzano, Head of Truck Tires Americas, Continental, said, “Digital tyre monitoring is becoming essential for improving fleet safety, efficiency and sustainability. With Sensor Ready tyres, we are offering one of the most advanced and user-friendly solutions on the market – reducing installation time, improving reliability and making it easier than ever for fleets to adopt connected tyre technologies.”

Comments (0)

ADD COMMENT

Link Copied!

Scandinavian Enviro Systems AB (publ) has secured a three-month extension of its ongoing company reorganisation, as approved by the Gothenburg District Court on 30 June 2026. The revised deadline now extends to 27 August 2026, with Johan Sölveland of Ackordscentralen continuing as the appointed reorganisation administrator. The initial reorganisation proceedings commenced on 27 February 2026.

The extension is strategically designed to facilitate the finalisation of critical long-term financing negotiations and the completion of a formal reorganisation plan. Enviro’s internal timeline projects that the plan will be ready for presentation in August 2026, concurrently with a comprehensive financing package to support its implementation. A key component of the proposal will involve a debt write-down, with non-priority creditors preliminarily offered a minimum 25 percent settlement, payable three months post-plan ratification, though this figure remains subject to revision.

The company maintains that the progress achieved during the initial phase has laid a solid foundation for a successful restructuring. Enviro’s preliminary assessment indicates that the current trajectory supports the ultimate goal of establishing a sustainable, long-term capital framework, with the reorganisation plan proceeding according to schedule.

Comments (0)

ADD COMMENT

Link Copied!

International environmental company Genan has entered into a definitive agreement to acquire ESTATO Umweltservice's mechanical tyre recycling facility in Weiden, southeastern Germany, from the ATU Group, a major domestic chain for automotive service and repair. The transaction includes a concurrent long-term cooperation pact designed to secure a consistent supply of end-of-life tyres for the plant, which currently processes approximately 45,000 tonnes of such material each year.

This acquisition marks a significant expansion for Genan, which already operates six recycling facilities across Denmark, Germany, Portugal and United States. The company’s existing operations collectively yield an annual production capacity exceeding 400,000 tonnes of processed tyres, establishing it as a substantial player in the international recycling sector.

The strategic move aligns with Genan’s broader growth objectives, particularly its focus on markets offering the most promising long-term prospects. By integrating the Weiden site, the company aims to bolster its footprint in Germany while gaining access to attractive markets in Central and Eastern Europe. A key element of the deal is the partnership with ATU, which guarantees a steady inflow of used tyres collected from the group’s workshops in Weiden and Werl that are unsuitable for direct reuse.

Poul Steen Rasmussen, Genan’s Group CEO, outlined an ambitious investment plan for the Weiden factory, committing a double-digit million-euro sum for a comprehensive upgrade over the coming year. The intention is to construct a technologically advanced production line on the existing premises, leveraging the company’s expertise in industrialising recycling processes. This approach mirrors a previous successful transformation in Portugal, where capacity, efficiency and environmental performance were significantly enhanced.

For ATU, the agreement ensures the professional, long-term processing of the vast quantities of used tyres generated by its workshops. The CEO of ATU Group expressed confidence that the partnership with Genan provides an excellent future for the Weiden site and its employees, combining industrial scale with a clear dedication to sustainable recycling. Both parties view the collaboration as a vital contribution to the circular economy, transforming waste into valuable raw materials.

The acquisition is also seen as a bellwether for the European recycling industry, signalling a phase of consolidation and heightened focus on circularity. Genan’s leadership noted that increasing political emphasis on waste management will drive demand for high-quality recycled materials, a need that requires significant investment in production technology. The group’s operations, which recycle rubber, steel and textile fibres for use in flooring, asphalt and industrial goods, are positioned to capitalise on this growth trajectory. The agreement is currently pending regulatory approval and is anticipated to be finalised shortly.

Comments (0)

ADD COMMENT

Link Copied!