Steelastic Co. appointed Hemant Agrawal as Business Development Manager for Asia Pacific to expand its tyre manufacturing equipment business in the region.

Agrawal joins from Yokohama India, where he served as senior project manager until June 2024. He brings 18 years of experience in the tyre industry, including roles at Bridgestone and JK Tyre & Industries, the company said in a statement.

The appointment comes as tyre manufacturers in the Asia Pacific increasingly focus on automation and manufacturing innovation to meet growing regional demand.

Steelastic, which specialises in tyre component manufacturing equipment, is looking to strengthen its presence in key markets like India and Southeast Asia.

The Tyre Pressure Monitoring System (TPMS) tech, despite its huge safety benefit, is still seen as a premium feature in most mass-market passenger vehicle segment and two-wheelers in India. Aurangabad-based component supplier Varroc’s Indirect TPMS with over 90 percent accuracy aims to make smart inroads. Tier 1 automotive supplier Varroc is looking to harness the data from GPS sensor and Anti-Lock Braking System (ABS) sensors to provide tyre pressure information to two-wheelers and four-wheelers. 

The company is looking to make smart gains through Indirect Tyre Pressure Monitoring Systems (ITPMS), which rely on existing sensors in a vehicle to generate the information without compromising on quality and time-lag.

Fritz Abraham, Chief Technology Officer, Varroc, told Tyre Trends that “the direct TPMS uses pressure sensors at the air inlet of each tyre and communicates the information to the vehicle dashboard using wireless communication or through complex harness. This is not only expensive but also require heavy maintenance. If there exists a solution that can use the existing sensors and provide the information of tyre pressure, it is the ‘Indirect/Intelligent Tyre Pressure Monitoring System’. This system provides information of the tyre pressure without the need of a pressure sensor.”

The radius of the tyre changes with respect to air pressure and hence the linear displacement per one rotation of tyre changes with respect to the pressure. The linear displacement can also be measured using GPS by calculating the rotational speed of the wheel and radius of the tyre.

The ITPMS solution simply put is a software stack that can be integrated with Varroc’s cluster and telematics solutions. The machine learning (ML) software analyses various parameters set by the company to provide tyre pressure reading to the user. Since it does not require any additional TPMS hardware, it is substantially cheaper compared to solutions using battery-based sensors.

“The ITPMS exploits the deviations in linear displacement with respect to wheel rotations and predicts the tyre pressure. This relation is not straightforward; it is a complex method to derive the mathematical equations. Hence, ML techniques are used to quantify the relation,” said Abraham.

The ITPMS primarily requires a GPS sensor (telematics data) and ABS, which is integrated during the vehicle assembly level. Varroc states that OEMs will be able to provide access to the tyre pressure on any HMI (Human-Machine Interface) device like the vehicle instrument cluster, vehicle telematics and connectivity app, among others, to easily provide the information of the tyre pressure.

Varroc had initially initiated the development of the ITPMS specifically for two-wheeler applications. The company mounted a GPS device on a two-wheeler equipped with ABS. It collected the data during vehicle operation across varied scenarios, including differing tyre pressures, diverse road conditions and various weather conditions such as sunny and rainy days.

“This data was then post-processed and analysed using data science and machine learning techniques to develop a model that accurately captures the relationship between tyre pressure, wheel speed and the speed as measured by the GPS. This model forms the foundation for understanding and monitoring tyre pressure indirectly using available data points from the vehicle’s operation,” he shared.

Demand scenario for TPMS

It is no secret that while TPMS technology has been around for more than a couple of decades, its adoption in India still remains a very small percentage. In India, most TPMS solutions available in the OE as well as aftermarket are Direct TPMS.

They are said to have their own set of challenges, such as its reliability due to varying temperatures, environmental and climatic conditions. Then there are the challenges associated with wireless communications. Sensor battery issues and cost too are deterrent factors.

On the other hand, the small percentage of vehicles that utilise existing ITPMS categorise the tyre pressure in broad classifications (low pressure or high pressure). They do not provide precise measurements, which limits their adoption and effectiveness in ensuring optimal tyre performance and safety.

However, Varroc already has developed the ITPMS to provide basic information (low or high); now it is in advanced stages of development to provide precise tyre pressure information with over 90 percent accuracy.  While the company has been tight-lipped about the introduction of the solution in the market, Varroc is said to be in discussions with its clients to bring it to the market soon.

Abraham further shared, “The primary reason for the limited adoption of TPMS is cost. Premium segment vehicles often include TPMS as a standard feature due to the higher price range, making it more feasible to absorb the associated costs. In contrast, aftermarket TPMS solutions are generally expensive and demand ongoing maintenance, which can be a deterrent for many vehicle owners.  Additionally, there is a general lack of awareness regarding the importance of maintaining optimal tyre pressure. Many drivers may not fully understand the safety, performance and fuel efficiency benefits of consistent tyre pressure monitoring, further impacting the adoption rate of TPMS systems.”

As per the company, the ITPMS comes with self-learning feature and is designed with 80 percent cold tyre pressure threshold and tested per AIS 154. The threshold can be further optimised and customised as per the requirement of the customer.

Continental AG, the German tyre maker, launched its PremiumContact 6 performance tyres and ContiSeal puncture-prevention technology in India, expanding its presence in one of the world’s fastest-growing automotive markets.

The company showcased the products at Chennai’s Wabco Proving Ground, demonstrating its latest passenger and commercial vehicle offerings.

The PremiumContact 6 line, targeting India’s premium vehicle segment, incorporates several key technologies: the Macroblock technology provides improved cornering stability, while silica compounds enhance grip in both wet and dry conditions. The tyres also feature asymmetric tread patterns designed to reduce deformation.

These tyres will be available in 17- to 20-inch rim sizes through Continental’s Indian dealer network.

ContiSeal technology

The ContiSeal system can automatically repair up to 8 percent of punctures from objects up to 5 millimeters in diameter, addressing a key concern in India’s varied road conditions. The technology uses a viscous sealant layer inside the tyre, eliminating the need for immediate roadside repairs or spare wheels.

Commercial vehicle expansion

In the commercial vehicle segment, Continental has introduced two significant additions to its lineup: The company now offers 295/90 R20 tires with five tread patterns specifically designed for hybrid and regional applications and 235/75 R17.5 sizes engineered for light commercial vehicles.

Continental didn’t disclose pricing details for the new products.

Speaking at the launch, Samir Gupta, Head of Central Region – BA Tires APAC and Managing Director of Continental Tires India, stated, “The launch of the PremiumContact 6 and ContiSeal is another step in our commitment to bringing advanced, tailored solutions for Indian roads as part of our ‘In the Market, For the Market’ strategy. The products exemplify our dedication to safety, comfort, and performance, addressing the diverse challenges faced by Indian consumers.”

He added, “With the new launches, we aim to instill confidence, ensure a superior driving experience for our customers, and generate value for stakeholders.”

Omni United Pte. appointed Stéphane Clepkens as Test Manager, hiring a veteran tyre expert to oversee the Singapore-based manufacturer's testing operations and performance analysis.

Clepkens, who has more than 25 years of tyre testing experience, previously held senior positions at Continental AG and Nokian Tyres Plc. The company said he will manage relationships with independent testing organisations while conducting hands-on analysis as a professional handling driver.

"We are thrilled to welcome Stéphane to the Omni United team. His extensive experience and hands-on expertise will be vital in our mission to make premium, high-quality products affordable to all. Stéphane's appointment reinforces our commitment to innovation, quality, and delivering exceptional value to our customers worldwide," said GS Sareen, president and CEO of Omni United.

The hire brings specialised expertise to Omni United's testing programme, including extensive experience at Germany's Nürburgring-Nordschleife racing circuit. Clepkens has worked as a freelance tester with multiple automotive and tyre manufacturers.

The appointment strengthens Omni United's technical capabilities as the company competes with larger global tyre manufacturers in performance and testing validation.

"I am thrilled to join Omni United and am committed to ensuring Radar Tyres are rigorously tested to outperform premium brands while remaining affordable. This opportunity allows me to collaborate with a dynamic team that shares my passion for innovation and excellence in tyre technology," said Clepkens.

South Korean start-up is transforming tyre safety by delivering real-time data insights that go beyond traditional TPMS, monitoring tyre pressure, temperature, wear and alignment. Targeted at fleet operators and manufacturers, BANF’s system improves vehicle safety, reduces costs and supports sustainability. With global partnerships including Volvo and Hyundai, BANF is also exploring market opportunities in India.

When it comes to vehicle safety and fuel efficiency, the role of tyres has often been underrated. Modern vehicles have undergone significant advancements over the decades, evolving from basic mechanical structures to sophisticated mechatronic and digital systems. However, for most, tyres remain largely unchanged – seemingly confined to the traditional black, rubber look without much technological upgrade.

The Tyre Pressure Monitoring System (TPMS), introduced in 1986 within high-end luxury cars, has yet to achieve global standardisation. Apart from a few countries where it is mandated, TPMS remains a novelty even in modern vehicles.

BANF (Begin a New Future), a South Korean start-up focusing on software and hardware technology to fully digitalise tyre information, is determined to change this. In an exclusive conversation with Tyre Trends, Ron Yoogun Lee, VP of Global Business Development at BANF, explains the company’s purpose:

“BANF was founded to address this critical need by integrating smart sensor technology and data analytics into tyre management. Our mission is to elevate vehicle safety, enhance tyre performance and reduce environmental impact through the digitalisation of tyre data. By providing real-time insights into tyre conditions, BANF empowers fleet operators, manufacturers and drivers to optimise maintenance, lower costs and promote sustainability. This drives us to tackle industry challenges with transformative solutions, pioneering a safer and more connected future for mobility.”

Expanding beyond basic TPMS capabilities

Lee explains that one of the primary limitations of current TPMS is its restricted data scope. Traditional TPMS sensors monitor tyre pressure at low frequencies, transmitting data every few minutes but focusing solely on air pressure.

BANF’s technology, however, gathers a wider range of tyre data, including pressure, temperature, tread wear, wheel alignment and even lug nut stability. This approach goes well beyond air pressure monitoring, providing insights that make tyres ‘smarter.’

Using machine learning, BANF’s system analyses the data to offer valuable insights to drivers and fleet operators regarding not only tyre health but also cargo load measurements and road surface conditions. The data is reportedly up to 90 percent accurate.

Lee details the core of BANF’s solution, which is built on two main components:

Tyre-Mounted Sensor (iSensor): A 3-axis accelerometer-based sensor attached (glued) inside the tyre’s inner liner, the only point of contact between the vehicle and the road.

Smart Profiler (Transmitter): Mounted on the mud flap or wheel arch and connected to the vehicle’s battery, this device wirelessly powers the sensor using magnetic resonance, gathering data on the tyre's internal and external conditions.

“Unlike standard TPMS, our system collects and analyses a comprehensive range of data points, offering real-time insights into tyre health and performance. This includes not only pressure but also factors such as temperature, tread wear and load, providing a more complete picture of the tyre’s condition,” he says.

BANF considers its unique selling point to be its advanced digitalisation and data analytics capabilities. The system empowers fleet managers, manufacturers and drivers to make proactive, data-driven decisions to enhance safety, optimise tyre performance and reduce maintenance costs. This comprehensive approach to tyre monitoring addresses the limitations of traditional TPMS, meeting the rising demand for safer, smarter and more efficient mobility solutions.

Continuous power and data collection

BANF’s technology enables continuous power supply to high-speed rotating tyres using resonant wireless power transmission. This allows the internal sensors to continuously collect data while driving, capturing 3-axis (X, Y, Z) accelerometer data to support advanced algorithm development. Additionally, BANF leverages mathematical modelling expertise to ensure high efficiency and minimal error in resonant wireless power environments.

Despite TPMS technology existing for over four decades, it still lacks widespread adoption. Why is that? Is it due to cost, awareness or maturity of the technology? Lee attributes the slow adoption of basic TPMS to limited consumer awareness and the system’s restricted functionality.

While TPMS provides basic air pressure information, it does not address other crucial aspects of tyre health, such as temperature, tread wear and load. This limited capability diminishes its perceived value, especially among consumers and manufacturers seeking comprehensive solutions.

“However, with the inevitable rise of electric vehicles (EVs) and autonomous vehicles (AVs), the demands on tyres are increasing. EVs, with their heavier batteries and higher torque, place additional stress on tyres, while AVs, designed for continuous operation, further amplify this strain. Traditional tyre monitoring methods, such as visual inspection, are inadequate for autonomous vehicles. As these trends reshape the automotive landscape, the need for advanced tyre monitoring systems that go beyond basic TPMS is growing. This shift will likely increase consumer awareness and drive the adoption of more comprehensive tyre monitoring solutions,” explains Lee.

While BANF may still be relatively unknown, the Korean start-up is already collaborating with major players like CampX by Volvo Group, Hyundai Motor Group, DHL and more than 20 other global organisations.

“Our primary target clients are fleet management companies operating commercial vehicles, particularly in the Truck and Bus Radial (TBR) segment. These clients benefit most from our advanced tyre monitoring solutions due to the significant return on investment (RoI) from optimised tyre usage, enhanced safety and reduced maintenance costs. By providing real-time insights into tyre health, we enable fleet operators to make data-driven decisions that minimise downtime and maximise efficiency. We currently produce 1,000 units monthly and are expanding our manufacturing capabilities,” shares Lee.

Plans for India and tyre safety

India, traditionally a cost-conscious market, has emerged as a major manufacturing hub and one of the fastest adopters of new technologies. In response to a question on BANF’s potential interest in India, Lee reveals:

“We are currently working with several companies in India, including major tyre manufacturers, vehicle manufacturers and last-mile fleet operators. We are supported by KISED, an arm of the Ministry of SMEs of Korea and NIPA, part of the Ministry of Science and ICT. We are actively engaging with stakeholders in the Indian innovation ecosystem and will be visiting India shortly to strengthen partnerships and explore further opportunities.”

Acknowledging India’s cost-sensitive market, Lee adds, “We are considering options for a facility setup worldwide, with India being one of our top choices.”

Road safety remains a priority for both the Indian automotive industry and the world. Despite numerous initiatives and technologies, the World Health Organisation (WHO) reports that 1.19 million lives are lost in road accidents each year. Road traffic injuries are the leading cause of death for children and young adults aged 5–29 years, with 92 percent of fatalities occurring in low- and middle-income countries.

Focus areas for tyre industry safety and efficiency

Lee identifies three key areas where the tyre industry can improve safety and efficiency:

1. Advanced Materials: Developing new tyre compounds that enhance durability and reduce rolling resistance can improve safety and energy efficiency. Lightweight, high-strength materials reduce energy loss and extend tyre life, crucial for EVs demanding lower energy consumption for longer range.

2. Intelligent Monitoring Systems: Smart sensors to monitor tyre health in real-time are increasingly essential. By tracking metrics such as pressure, temperature, tread wear and load, intelligent systems can alert drivers or fleet managers to potential issues before they escalate. This proactive approach enhances safety and fuel efficiency, as well-maintained tyres contribute to better aerodynamics and lower fuel consumption.

3. Sustainable Manufacturing: Optimising production to minimise environmental impact is crucial. Using eco-friendly materials, reducing waste and recycling tyres contributes to a more sustainable industry, aligning with global trends towards green manufacturing and supporting the energy efficiency goals of the automotive industry.

INTERVIEW: Ron Yoogun Lee

What are the upcoming key trends you see in the tyre industry?

One of the key trends in the tyre industry is the increasing emphasis on safety. As vehicles become more advanced, with a growing number of electric vehicles and autonomous vehicles entering the market, the demands placed on tyres are intensifying. EVs, for instance, have heavier loads and higher torque, which increase wear and tear on tyres, while AVs require consistent, reliable performance to operate safely around the clock. These factors are driving the need for smarter tyre solutions that go beyond traditional monitoring systems.

There is a growing demand for intelligent tyre technologies that provide real-time data on various parameters like pressure, temperature, tread wear and load. Such capabilities allow fleet operators, manufacturers and individual drivers to maintain tyre safety proactively, reduce maintenance costs and ensure optimal performance under diverse conditions. Meeting the advanced requirements of EV and AV clients is crucial, as their vehicles rely on enhanced tyre performance for safety and efficiency. As a result, the industry is moving towards digitalisation and smart sensors to address these evolving needs, marking a significant shift in tyre technology and monitoring.

What is BANF’s business plan (OE supplier), or you will also look at aftermarket opportunities?

BANF’s business plan primarily centres around building strong partnerships with Original Equipment (OE) manufacturers and OE suppliers. Our goal is to enhance tyre safety and efficiency directly at the manufacturing stage, ensuring that end customers benefit from high-quality, intelligent tyre solutions from the outset. Currently, our focus is on the commercial vehicle segment, where we see substantial demand for advanced tyre technology to improve safety, performance and operational efficiency.

That said, we also recognise the significant potential in the aftermarket sector and are actively exploring opportunities to expand into this space. The aftermarket offers us the chance to provide a wider range of products and services directly to end-users. By pursuing both OE partnerships and aftermarket avenues, we aim to deliver innovative tyre solutions that meet the evolving needs of our customers across the entire lifecycle of their vehicles.

What are the other products or areas that you would look to focus on?

Looking ahead, we still believe there is a lot can come out from tyre. We are currently developing many other advanced features to be announced soon. In a sense of product portfolio, we are looking into two-wheeler, three-wheeler market and also airplane tyres.